755604
24
Zoom out
Zoom in
Previous page
1/27
Next page
www.argonaudio.com
24
R a d i o 3 i
4. Tap the entry UNDOKWireless Device Remote Control.
The application details screen opens
5. Tap Install.
The UNDOK Wireless Device Remote
Control application is downloaded and
installed onto your Phone.
11.2 Setting up the connection to the Radio3i
After you download the UNDOK Wireless Device Remote Control application, you must set up a connection
between the Phone and the Radio3i. To do this, follow these steps:
1. On the Radio3i, navigate to Menu > Main menu > System settings > Network > Keep network
connected, and select YES.
The network connection now stays on when the device is in standby mode. This setting is retained in
the device’s memory after it is switched off and on again.
2. Set the Phone to use the same network access point as the Radio3i as follows:
a. Select Settings > Wi-fi.
b. Choose the network of the Radio3i. from the list.
c. If asked for a PIN code the default PIN code is 1234
Notice: the feature: Set up audio system” in the UNDOK app only applies for Devices without display
(Radio3i has a display so setup is done directly on the Radio3i)
12. Inactive standby
Out of the box, the Radio3i come with an automatic standby function. If the product is not operated for
two hours it will automatically go into standby. This applies also if the product is playing music.
This “feature” is a result of an EU law taking effect as of January 1st 2014.
To deactivate or change this “feature”, do the following:
- Choose “Menu”
- Go to “System settings”
- Scroll down to “inactive standby” and press select
- Choose your preferred setting and press select
13. Software upgrades and factory reset
13.1 Software upgrade
From time to time, Argon may make software upgrades available with bug fixes and/or additional
features. You can either check manually, or set Radio3i to check periodically automatically (this is the
default). If Radio3i detects that newer software is available, it asks if you want to go ahead with an
update. If you agree, the new software is then downloaded and installed. After a software upgrade, all
user settings are maintained.
CAUTION: Before starting a software upgrade, ensure
that Radio3i is plugged into a stable mains
power connection. Disconnecting power
during a software update may permanently
damage the unit.
To turn automatic checking on or off, select Menu > System settings > Software update > Auto-
check setting.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon Radio 3i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon Radio 3i in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon Radio 3i

Argon Radio 3i User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info