642208
2
Zoom out
Zoom in
Previous page
1/2
Next page
www.argonaudio.com
Q u i c k s t a r t
Quick start
Start up
1. Make sure you Wi-Fi Router is On.
2. Extend the Antenna on the Radio.
3. Plug the Power supply into an electric outlet and
into the back of the Radio.
4. Once connected, the Radio will start up
automatically and take you through a Guide.
5. In the Guide, choose your wished setting by
turning the “Tuning/Selectknob and confirm your
choices by pressing the “Tuning/Selectknob.
6. Final step in the Guide is setting the Wi-Fi code;
use the “Tuning/Selectknob to choose the
letter/number of the password, Confirm each
letter/number by pressing the “Tuning/Select
knob. Once finished putting in the password, keep
turning the “Tuning/Selectknob until it reaches
the “OK” area in the Display on the right hand
side. Press the “Tuning/Selectknob to confirm.
The Radio will now connect to your network.
Basic Operating
1. Use the “Mode” button to change between the
Modes; Internet Radio, Music Player, DAB, FM,
AUX and Bluetooth (if your Radio has Bluetooth)
2. In Internet Radio mode press the “Menu” button
to recall Internet Radio Menu. To see station lists
and stations, choose “Station List” in the Menu
and press the “Tuning/Select” knob to select.
3. If you want to see what stations area available,
select “Stations” and press the “Tuning/Select
knob. You now have the choice to search and list
stations by several criteria’s. Once you make a
choice remember to always use the
Tuning/Select” knob to confirm.
4. For DAB, first time you choose DAB mode, the
Radio will automatically start a search for
available DAB stations.
5. DAB Stations can be chosen by turning the
Tuning/Selectknob.
6. Once the prefer station is found press the
Tuning/Selectknob and the chosen station will
start playing.
7. Automatic station search in FM mode is done by
pressing and holding the “Tuning/Select” knob.
8. To store a station in DAB or FM mode on one of
the 1-4 preset buttons, press and hold the wished
preset button for 3 sec., while playing the station
that you want to store. When stored, the display
will show “Preset stored”.
9. In Music Player mode you should choose “Shared
Media” by pressing the “Tuning/Select” knob. In
order to access and play shared media from your
PC, NAS drive or other storage on your network,
you need first to make sure that the Argon Audio
Radio and the PC/Music storage device is
connected to the same network. Second you
need to make sure that the Media you want to
play back is allowed to be shared. (Shared Folder
setting in your PC).
You can find a full User Manual in PDF format
for this product on; www.argonaudio.com
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon iNet3 plus v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon iNet3 plus v2 in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon iNet3 plus v2

Argon iNet3 plus v2 User Manual - English - 70 pages

Argon iNet3 plus v2 Quick start guide - German - 2 pages

Argon iNet3 plus v2 User Manual - German - 69 pages

Argon iNet3 plus v2 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info