642208
64
Zoom out
Zoom in
Previous page
1/70
Next page
www.argonaudio.com
iNet3+v2
64
11.2 Setting up the connection to the iNet3+v2
After you download the UNDOK Wireless Device Remote Control application, you must set up a
connection between the Phone and the iNet3+v2. To do this, follow these steps:
1. On the iNet3+v2, navigate to Menu > Main menu > System settings > Network > Keep
network connected, and select YES.
The network connection now stays on when the device is in standby mode. This setting is
retained in the device’s memory after it is switched off and on again.
2. Set the Phone to use the same network access point as the iNet3+v2 as follows:
a. Select Settings > Wi-fi.
b. Choose the network of the iNet3+v2. from the list.
c. If asked for a PIN code the default PIN code is 1234
Notice: the feature: Set up audio system” in the UNDOK app only applies for Devices without display
(iNet3+V2 has a display so setup is done directly on the iNet3+V2)
12. Inactive standby
Out of the box, the iNet3+V2 come with an automatic standby function. If the product is not operated for two
hours it will automatically go into standby. This applies also if the product is playing music.
This “feature” is a result of an EU law taking effect as of January 1
st
2014.
To deactivate or change this “feature”, do the following:
- Choose “Menu”
- Go to “System settings”
- Scroll down to “inactive standby” and press select
- Choose your preferred setting and press select
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon iNet3 plus v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon iNet3 plus v2 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon iNet3 plus v2

Argon iNet3 plus v2 Quick start guide - English - 2 pages

Argon iNet3 plus v2 Quick start guide - German - 2 pages

Argon iNet3 plus v2 User Manual - German - 69 pages

Argon iNet3 plus v2 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info