642208

Argon iNet3 plus v2 Manual

3
Zoom out
Zoom in
Previous page
1/70
Next page
www.argonaudio.com
iNet3+v2
1
Dear Customer,
Quality has always been our driving force and founding Argon Audio is a natural
extension of this philosophy.
We have 20 years’ experience in creating and specifying high quality products,
manufacturing them and selling them on to end users with Value-for-Money as the
primary aim. And Argon Audio is a brand fully compliant with these values. Design,
features and quality standards are all specified in Denmark and manufacturing takes
place in the Far East, where quality vendors are highly competitive - and as a result
supply outstanding Value-for-Money products. – To the delight of both ourselves and
our customers!
Congratulations with your iNet3+v2, may it bring years of enjoyment.
www.argonaudio.com
iNet3+v2
3
7
DAB radio mode
52
7.1
Scanning for stations
52
7.2
Selecting stations
53
7.3
Now playing information
53
7.4 Settings 54
8
FM radio mode
55
8.1 Selecting stations 55
8.2 Now playing information 56
8.3
Settings
56
9
Aux in mode
57
10
Alarms and sleep
58
10.1
Alarms
58
10.2
Sleep
59
11
UNDOK Wireless Remote Control
60
11.1 Obtaining and installing the UNDOK
Wireless Device Remote Control
application
61
11.2
Setting up the connection to the
iNet3+v2
64
12
Inactive standby 64
13
Software upgrade and factory reset
65
13.1
Software upgrade
65
13.2
Factory reset
65
14
Troubleshooting and error messages
66
14.1 Error messages 66
14.2 Troubleshooting 67
Glossary 70
www.argonaudio.com
iNet3+v2
4
1. Introduction
1.1 Safety
Safety Instructions
Please store this instruction manual for future
reference.
• Do not use this product near water or
moisture.
Clean only with a dry cloth.
Unplug this product from the wall outlet before
cleaning.
• Place the unit on a solid surface.
• Do not put it in a closed bookcase or a cabinet
that may keep air from flowing through its
ventilation openings.
• Do not install near any heat sources, such as
radiators, heat registers, stoves or other
appliances that produce heat.
• Protect the power cord from being walked on
or pinched, particularly at plugs and the point
where they exit from the product.
• Servicing is required when the product has
been damaged. Do not attempt to service this
product yourself. Opening or removing covers
may expose you to dangerous voltages or
other hazards. Please contact the
manufacturer to be referred to an authorized
service center near you.
• To prevent risk of fire or electric shock, avoid
over loading wall outlets, extension cords, or
integral convenience receptacles.
• Do not let objects or liquids enter the product.
• Use proper power sources. Plug the product
into a proper power source, as described in
the operating instructions or as marked on the
product.
www.argonaudio.com
iNet3+v2
5
1.2 Features;
This manual describes how to use the Argon
iNet3+v2 Internet radio, an advanced but easy-to-
use Wi-Fi connected audio system with the following
modes:
• Internet Radio with access to over 20,000
stations, ‘Listen again’ broadcasts and podcasts
• Music player allowing easy navigation and
playback through a network-stored library of
music files including AAC+, MP3, WMA, WAV,
FLAC.
• Mediaplayer, “Play To” feature allowing media
to be pushed from a PC running Windows 7 to
iNet3+v2 operating in Digital Media Renderer
(DMR) mode.
• DAB/DAB+ digital radio with a wide choice of
channels and digital quality sound broadcast
free-to-air
• FM with RDS (Radio Data System)
• Spotify Connect play back and control. Via
Spotify app.
• Aux in for external music sources such as MP3
players
iNet3+v2 also provides the following features:
• Large 2.7 inch display for easy control and
clear information display, with up to six lines of
text plus status icons.
• Wi-Fi Remote control from an Apple iPhone, iPad
iPod touch and Android, using the Argon Audio
Wireless Device Remote Control application
• Clock with auto-update capability and dual
independent alarms
• Sleep/snooze
• UPnP Music player modes
• Multiple network profiles for easy setup and
portability
• Multiple operating languages
1.3 Carton contents;
We have during production and packing carefully
checked and inspected the unit.
After unpacking please check for any damage from
transport.
We recommend that you keep the original carton
box and packing material for any future shipping.
In the carton box you will find:
• ARGON iNet3+v2
• DC12V 2A power adapter
• User manual, Remote Control
www.argonaudio.com
iNet3+v2
6
1.4 External resources
To operate iNet3+v2, the following external resources are needed:
• A power source (100-240 V mains supply)
• A wireless (Wi-Fi) network (provided through a router) with appropriate permissions and
password if necessary (for Internet radio and Network Music player modes)
• Broadband Internet access (for Internet radio mode and Internet Software Update)
• A music library stored on the network
• An Apple iPhone, iPad, iPod touch or Android device (for using the Wireless Device
Remote Control application)
• An external audio source (for Aux in mode)
1.5 Conventions used in this manual
Button (press) Physical button on the keypad
Option (select) Menu option shown on the display
Name Menu, screen or other name
•
www.argonaudio.com
iNet3+v2
7
2. Controls, connectors and display
2.1 Main controls
www.argonaudio.com
iNet3+v2
8
Function/usage
Turn to scroll through a menu or station list. The chosen option is highlighted in
reverse text (dark characters on a white background). Press to select.
Turn to adjust the volume up or down
Function/usage[1]
Standby: Turn on or back to standby mode (showing clock and date). Cancels
sleep function.
Sleep/snooze: When playing, standby after a set time.
When alarm is sounding, snooze for a set time, by pressing the Snooze button on
top of the iNet3+v2
Mode: Cycle through the modes: Internet Radio, Music player, DAB, FM, Aux in
Enters alarm wizard, turns off alarm (when alarm is sounding) and toggles between
alarms in standby.
Info: View more information about the station or track playing. Press again to cycle
through further information screens then return to the normal Now playing screen.
www.argonaudio.com
iNet3+v2
9
Back
Back: Return to previous screen. In play mode, this button may be used to return to
the last track list or station list.
Menu
Menu: Show menu for the current mode. Press again to show Now playing screen.
Preset
Preset: Press for the Preset recall/Save menu;
4
Preset: stored station no.4
3/
Next: Select next track in Music Player mode and Preset 3 in Radio mode
2/
Previous: Select start of track, previous track Music Player mode and Preset 2 in
Radio mode
1/
Play/pause/stop in Music Player mode. Or Preset 1 in Radio mode
[1] Some buttons have alternate functions depending on whether they are pressed quickly or held down.
www.argonaudio.com
iNet3+v2
10
2.2 Spotify Connect Control and play back
Connect your iNet3+v2 and Spotify control device to your home wi-fi
All devices need to be on the same wi-fi.
Get the Spotify app/Premium free trial
Download the Spotify app for your mobile or tablet from your app store, and take the Premium free trial.
Log in to Spotify and start playing a track.
Play millions of songs on your iNet3+v2.
To start with, your mobile/tablet and iNet3+v2 need to be on the same wi-fi. Tap on the Now Playing bar to
reveal extra controls, and select the Speaker icon. On the Connect screen, just choose your iNet3+v2 and it'll
start playing. Adjust the volume at the volume bar below on the Connect screen.
Control oaf play back directly on iNet3+v2
Besides being able to control the volume, you can also pause/play and skip tracks directly in iNet3+v2. Use
the preset buttons 1, 2 and 3 (as shown on page 9) on the front of iNet3+v2.
Notice: When you stop Play back on your Spotify device, iNet3+v2 will show “no media” in the display. To get back to
Internet Radio, DAB, FM, Music Player or Aux, you need to press the MODE button on the iNet3+v2.
www.argonaudio.com
iNet3+v2
11
2.3 Connectors
As shown below has connectors (from left to right) for the following:
• Headphones out
• Line out (to connect to an external amplifier)
• Aux in (to connect external media like iPod)
• DC power in (12 V)
www.argonaudio.com
iNet3+v2
20
1. Select Update from DAB, Update from FM, Update from Network or No update.
2. If you are updating from the network, set your time zone.
3. If your country uses daylight saving, the automatically updated time from the network may
be wrong by one hour. When daylight savings are in effect (during the winter), turn on the
Daylight savings option to rectify this.
Note that if you are updating the time from DAB or FM, the Daylight savings option has no
effect on the clock’s time.
iNet3+v2 will auto-update from the selected source when time information is available.
Manual set
If you set No update, the wizard now prompts you to set the time and date manually.
The date and time are displayed as
dd-mm-yyyy and hh:mm AM/PM
with the first value, dd, active
(flashing).
Adjust each value with the Select
control. As each value is set, the
next value becomes active and
flashes.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon iNet3 plus v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon iNet3 plus v2 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon iNet3 plus v2

Argon iNet3 plus v2 Quick start guide - English - 2 pages

Argon iNet3 plus v2 Quick start guide - German - 2 pages

Argon iNet3 plus v2 User Manual - German - 69 pages

Argon iNet3 plus v2 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info