Wireless Internet & FM Radio
congure it to allow the radio to access your media library. In order to do this, you will need
to do the following:
a. Keep pressing BACK to get to the radio’s top-level menu and then turn the rotary knob
to select ‘Media Player’.
b.
Press SELECT and then turn the knob to highlight ‘UPNP Servers’.
c.
Press SELECT and the radio will scan for all available UPnP servers. Note, this may take
a few seconds for the Ar
gon iNet1 to complete its scan and before the scan has completed,
the radio will display ‘[Empty]’. The radio will continue to display ‘[Empty]’ if no UPnP
servers are found.
d. After a successful scan, select your UPnP server, by rotating the knob if there is more
than one UPnP server, and then press SELECT (note, your radio will display ‘Access
Denied’ at this stage).
4.
Your PC will now prompt you that a device has attempted to connect to your UPnP
server. In order to allow the radio to have access to the media les, you will need to click the
‘Library’ tab from Windows Media Player 11 and select the ‘Media Sharing…’ item to open
the ‘Media Sharing’ window.
Selecting ‘Media Sharing…’ for Windows Media Player 11:
5.
From the ‘Media Sharing’ window, the Argon iNet1will be listed as an unknown device.
Click on the unknown device listed, and then click the ‘Allow’ button and then click ‘OK’.
Allowing the Argon iNet1 to Connect:
31
