Manual Argon iNet1 (page 10 of 54) (English)

642223

Zoom out

Zoom in

1/54

Wireless Internet & FM Radio

Steps for connecting your Argon iNet1 to your wireless network

Step 1 - Power up the Argon iNet1

Plug the cable from the mains adapter into the socket labelled 12-15V DC on the back of

the Argon iNet1.

CAUTION: Use only the mains adapter supplied with the radio. Connecting a power supply

with a different rating will cause permanent damage to the radio and may be hazardous.

The display on the fr

ont of the Argon iNet1 will light up and say:

After a few seconds, this will change to show:

Step 2 - Scan for a wireless network connection

When the display says <Scan for networks>, press the SELECT button.

(Note: if you make a mistake at any point, press the BACK button to go back to the previous

screen.)

Argon iNet 1

< Scan for networks >

No Stationlist available, what to do? Internetconnection is ok. It’s playing the saved stations only. Submitted on 10-6-2021 at 10:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Argon iNet1 in the language / languages: English as an attachment in your email.

The manual is 6,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon iNet1

Argon iNet1 Quick start guide - English - 2 pages

Argon iNet1 Quick start guide - German - 2 pages

Argon iNet1 Quick start guide - Dutch - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Argon iNet1 Manual

Product: