Manual Argon iNet1 (page 4 of 54) (English)

642223

Zoom out

Zoom in

1/54

Wireless Internet & FM Radio

Argon iNet 1 Quick start Guide

What you need before you can use your iNet1 radio

Before you can use your Argon Internet radio, you need the following:

• A broadband Internet connection. + either:

• A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a

router or

• A network cable connection (RJ45) between your router and Internet radio or

• A “power line” network, using the electrical cabling in the house as distribution network

• If your wireless network is congured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected

Access (WPA) data encryption then you need to know the WEP or WPA code so you can get the

Argon Internet radio to communicate with the network.

If you have the possibility to connect the Argon Inet1 to your Internet with a cable (RJ45), it is absolu-

tely the best solution. This gives a more stable and also much faster connection.

On Wi-Fi the Argon Internet radio should work anywhere within 40 metres of the wireless access point.

Before you continue, make sure that, if you wish to use your Argon iNet1 in wireless mode, your

wireless access point is powered up and connected to your broadband Internet. To get this part of the

system working you must read the instructions supplied with the wireless access point.

No Stationlist available, what to do? Internetconnection is ok. It’s playing the saved stations only. Submitted on 10-6-2021 at 10:25
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Argon iNet1 in the language / languages: English as an attachment in your email.

The manual is 6,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon iNet1

Argon iNet1 Quick start guide - English - 2 pages

Argon iNet1 Quick start guide - German - 2 pages

Argon iNet1 Quick start guide - Dutch - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Argon iNet1 Manual

Product: