755653
3
Zoom out
Zoom in
Previous page
1/5
Next page
w w w . a r g o n a u d i o . c o m 3
A LTO
5 5
Home Theatre Systems
Argon ALTO55 can be used as front channels in a surround
sound home theatre system.
Positioning the front loudspeakers within approximately 2 or
more meters of the sides of your TV will create the best
sound image in scale with the visual image.
The loudspeakers’ height should ideally be between the
centre and top of the screen.
If Argon ALTO55 are to be used for reproducing the
surround channels in a multi channel home theatre system,
we suggest you place them as illustrated in Figures 2 to 4
depending on the number of channels.
Connecting your loudspeakers
We recommend that you read the manual of your amplifier
or av-receiver carefully before connecting your
loudspeakers. Please switch off all equipment when
connecting your loudspeakers. The binding posts on the
terminal accepts wire up to Ø 4mm or cables with banana
plugs. Make sure that positive terminal binding posts on the
speaker (marked + and colored red) are connected to the
positive output terminal binding posts on the amplifier and
that the negative terminals on the speaker (marked – and
colored black) are connected to the negative output terminal
on the amplifier. See fig 5. You are now ready to enjoy your
Argon ALTO55 loudspeakers...!
Running-in period
We recommend a running-in time of your new Argon
ALTO55
loudspeakers of approximately 15-20 hours at normal
listening level before you decide on the final positioning of
the loudspeakers. During the running-in time the drive units
will settle in and perform as intended.
Care and cleaning
We don’t recommend use of any solvents or cleaners on
Argon ALTO55 cabinets, the cabinet surface usually only
requires dusting or cleaning with a damp soft cloth (only
use cold clean water).
The grille fabric may be cleaned with a normal clothes brush
or vacuumed carefully with the grille detached from the
cabinet.
Avoid touching the drive units, especially the tweeter, as
damage may result.
Environmental information
Argon ALTO55 loudspeakers comply with international
directives on the Restriction of Hazardous Substances
(RoHS) in electrical and electronic equipment and the
disposal of Waste Electrical and Electronic Equipment
(WEEE) - the crossed bin symbol indicates compliance and
that the products must be appropriately recycled or
processed in accordance with these directives.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon Alto 55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon Alto 55 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon Alto 55

Argon Alto 55 User Manual - German - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info