642243
6
Zoom out
Zoom in
Previous page
1/12
Next page
Connecting Your System
Step 1 - SPEAKER WIRE CONNECTION
1
Connect the RED (+) and BLACK (-) terminals from the left speaker to the
corresponding terminals on the right speaker using the included speaker wire.
Be sure to match the red-colored side of the speaker wire with the RED (+)
terminals and the black-colored side to the BLACK (-) terminals on each
speaker.
Note: As the Argon Speaker system is self-powered, do not connect the speaker
terminals to the speaker outputs of a stereo receiver.
Detailed procedure:
Remove the pre-cut insulation on the end of the speaker wire and twist
the exposed wire strands 2-3 times.
Use your thumb and finger to the unscrew the binding post connector
Insert each speaker wire into the holes on the side of binding postconnector.
Retighten the binding posts. The stripped wire portion should be secured
firmly in the connector.
Repeat the procedure to connect the other end of the speaker wire to the other
speaker. Be sure to match the wire color to the same terminal color on each
speaker. Also make sure that none of the speaker wire strands have come in
contact with an adjoining terminal.
6
1
2
STEREO INPUTSTEREO INPUT
AUDIO INAUDIO IN
OUT TO
RIGHT
OUT TO
RIGHT
5VDC CHARGE FOR iPOD5VDC CHARGE FOR iPOD
POWER ON/OFFPOWER ON/OFF
RR
LL
SUB OUTSUB OUT
2
Step 2 - POWE R CABLE CONNECTION
Verify that the voltage is corresponding with the voltage for your area.
Connect the power cord into the left speaker and the other end into the wall outlet.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon 7340 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon 7340 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info