805113
8
Zoom out
Zoom in
Previous page
1/11
Next page
20V 06/23
HOW TO CLEAN THE RADIATOR
STORAGE OF RADIATOR
Always unplug and leave the radiator to cool before cleaning.
Use a damp cloth to clean the radiator exterior and remove dust. Leave the casing to dry before using the
appliance again.
Do not immerse the radiator into the water.
Do not allow water to enter the radiator.
Do not use benzene, solvents or abrasive compounds to clean the radiator, as these may damage the casing.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
Ensure that the radiator is dry before inserting the plug.
Do not use metal tools to clean the radiator. Any metal fragments that may detach may come into contact with the
panel’s electrical components and cause a short-circuit.
In the event of malfunctions or damages, always contact an authorised service centre.
If the radiator is not used for prolonged periods, it must be stored together with this manual in its original packaging, in
a cool and dry place. Never put the appliance away when still hot. Wind the power cord on the appropriate cable
winder. Always wait for it to cool down.
The Timer knob is made up of 96 red segments (D), and each segment equals 15 minutes and allows the radiator to
be switched on and operated over a 24-hour period.
First of all it is necessary to adjust the current time, then turn the knob (A) clockwise to the position of the arrow (B),
which sets the current time.
Position the red button on ACTIVE TIMER to program the switching on and off of the radiator.
Position the outer ring of the clock (A) on the switch-on time: for example, to set the switch-on at 20.00, turn the outer
ring of the timer clockwise until the arrow indicator is at number 20. Then , set the duration of operation by moving the
red segments of the timer (D) outwards: considering that each segment is worth 15 minutes, to set 1 hour of operation
move 4 segments between 8 and 9 pm. The appliance will switch off at end of the set time.
During the set time interval, the operation of the radiator will in any case also be regulated by the thermostat.
If the button is positioned on “I”, the radiator always works, regulated only by the thermostat. If the button is positioned
on “0”, the unit does not work or stops working.
The timer setting does not reset after the unit is switched off, but each time the unit is unplugged the clock stops
updating the current time, so the next time the heater is switched on the current time will have to be reset, using the
arrow (B). If you want the radiator to work on the timer, leave the red button on Timer active .
PROTECTION SYSTEMS
This radiator has an overheating protection system which allows the product to be switched off when some parts
become excessively hot. To turn off the radiator completely, return the power selector to the 0 position and then turn
the thermostat knob anticlockwise until you hear a click of total shutdown. Then pull the cord out of the socket if the
appliance is not to be used for a certain period of time.
This radiator has an anti-overturning protection system, which allows it to be switched off in the event of the product
accidentally overturning, or if it is excessively tilted. Then put the radiator back in the vertical position, to resume normal
operation.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Warm Black TT 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Warm Black TT 9 in the language / languages: English as an attachment in your email.

The manual is 1.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Warm Black TT 9

Argo Warm Black TT 9 User Manual - German - 12 pages

Argo Warm Black TT 9 User Manual - French - 12 pages

Argo Warm Black TT 9 User Manual - Italian - 12 pages

Argo Warm Black TT 9 User Manual - Portuguese - 11 pages

Argo Warm Black TT 9 User Manual - Spanish - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info