805111
7
Zoom out
Zoom in
Previous page
1/10
Next page
17V 06/23
HOW TO USE THE RADIATOR
HOW TO CLEAN THE RADIATOR
STORAGE OF RADIATOR
Choose a suitable place to position the radiator, considering the general safety warnings given in the rst part of this
manual. Only use this radiator in an upright position. Set all controls to OFF position, insert the plug into the electrical
socket, ensuring that voltage is compliant with that specied on the product data plate.
After placing the power selector knob in position 0, turn it clockwise to select the heating mode and power as follows:
1 (ECO) 800W for Warm 9 and 1000W for Warm 11 – 2 (COMFORT) 1200W for Warm 9 and 1500W for
Warm 11 –
3 (SUPER) 2000W for Warm 9 and 2500W for Warm 11.
Then turn the room thermostat knob to the maximum position. When the temperature in the room reaches the desired
one, slowly turn the thermostat knob anticlockwise until the pilot light goes off. If the room temperature drops below the
set temperature, the radiator will automatically reactivate to reach the set temperature, in this way the room temperature
will remain constant with energy saving. If you want to change the set temperature, turn the thermostat clockwise to
increase it, or counterclockwise to decrease it.
To switch off the radiator, turn the selector knob to 0 and remove the plug if you do not plan to use the product.
This radiator has an overheating protection system which allows the product to be switched off when some parts
become excessively hot. To turn off the radiator completely, return the power selector to the 0 position and then turn
the thermostat knob anticlockwise until you hear a click of total shutdown. Then pull the cord out of the socket if the
appliance is not to be used for a certain period of time.
This radiator has an anti-overturning protection system, which allows it to be switched off in the event of the product
accidentally overturning, or if it is excessively tilted. Then put the radiator back in the vertical position, to resume normal
operation.
Always unplug and leave the radiator to cool before cleaning.
Use a damp cloth to clean the radiator exterior and remove dust. Leave the casing to dry before using the
appliance again.
Do not immerse the radiator into the water.
Do not allow water to enter the radiator.
Do not use benzene, solvents or abrasive compounds to clean the radiator, as these may damage the casing.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
Ensure that the radiator is dry before inserting the plug.
Do not use metal tools to clean the appliance. Any metal fragments that may detach may come into contact with
the panel’s electrical components and cause a short-circuit.
In the event of malfunctions or damages, always contact an authorised service centre.
If the radiator is not used for prolonged periods, it must be stored together with this manual in its original packaging, in
a cool and dry place. Never put the appliance away when still hot. Wind the power cord on the appropriate cable
winder. Always wait for it to cool down.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Warm 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Warm 9 in the language / languages: English as an attachment in your email.

The manual is 0.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Warm 9

Argo Warm 9 User Manual - German - 11 pages

Argo Warm 9 User Manual - French - 11 pages

Argo Warm 9 User Manual - Italian - 10 pages

Argo Warm 9 User Manual - Portuguese - 10 pages

Argo Warm 9 User Manual - Spanish - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info