665495

Argo Wally Manual

7
Zoom out
Zoom in
Previous page
1/7
Next page
15
V 09/15
5. This heater has a built in temperature sensor, which automatically monitors the ambient temperature and turn on the
machine to store the ambient temperature. The default temperature is 30 ℃.
Press the TEMPERATURE SETTING button to select the temperature, up to the desired level (15-36 ℃).
If the selected temperature is higher than the ambient temperature, the unit automatically turns on and heats up to the
selected temperature is reached. The unit will automatically maintain the temperature at a constant level.
6. You can also set the OPERATING TIME, acting on the TIMER button (right side) of the remote control. The timer LED
lights up on the display. Press the key one or more times to set the desired time (1-8 hours), which will appear on the
LED display, according to the following sequence:
OFF (no timer), 1, 2, 3, 4, 5, 6, 7, 8, OFF (no timer)
NB
The functions of switching on, heating mode selection and temperature control can be activated by both control
panel and remote control.
The TIMER setting and IONIZATION functions can be activated / deactivated only by remote control.
NB.
To completely shut the fan heater off, turn all the controls to OFF, and remove plug from the socket-outlet
normally.
After switching off the fan heater, the fan will continue to to run for a few seconds to cool the heating elements.
OVERHEATING SAFETY DEVICE
The fan heater includes an overheat protection system that shuts off the appliance when parts of it are getting too hot.
In this case:
switch off the fan heater;
remove the causes of abnormal operation or overheating (i.e. obstacles in front of air inlet or air outlet grille);
leave the heater cool down for 15/20 minutes;
switch on again the fan heater.
In the case the non-functioning persists, take the unit it to your local after sales service.
MAINTENANCE AND STORAGE
ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE.
IMPORTANT: DO NOT SUBMERGE THE CERAMIC FAN HEATER IN WATER
Cleaning the outside surface of the appliance
Turn the switch off and unplug before carrying out any maintenance work or moving the appliance.
Use a soft cloth to remove any dust from the fan heater.
If the fan heater is excessively dirty, use a soft cloth moistened with water and a mild detergent at a temperature lower than
50°C. Let the fan heater dry completely before use.
Do not use corrosive detergents or solvents such as petrol. Do not wash the appliance with water. Do not use oils, chemical
substances or other items to clean that may damage the surface.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
STORAGE
If the appliance is not used for prolonged periods, it must be stored together with this manual in its original packaging, in a
cool and dry place.
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE
2012/19/EU
At the end of its working life this equipment must not be disposed of as an household waste. It must be taken to special local
community waste collection centres or to a dealer providing this service. Disposing of electrical and electronic equipment
separately avoids possible negative effects on the environment and human health deriving from an inappropriate disposal and
enables its components to be recovered and recycled to obtain significant savings in energy and resources. In order to
underline the duty to dispose of this equipment separately, the product is marked with a crossed-out dustbin.
www.argoclima.com
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Wally at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Wally in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Wally

Argo Wally User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info