665461
6
Zoom out
Zoom in
Previous page
1/27
Next page
V 11/15
6
When you press the ON/OFF button on the remote control, the icon on the remote control
display will flash once and the air conditioner will emit a beep. This means that the signal has
been sent to the unit.
When the unit is off, the temperature will be shown on the remote control, the correspondent icon
will appear. If the unit is on, you will see the icon of the correspondent mode.
1. ON/OFF button
Press the ON/OFF button to turn the air conditioner on or off.
2. MODE button
Press this button to select the desired operating mode.
After selecting the mode, the correspondent light will turn on.
AUTO - COOL - DRY - FAN - HEAT
When you select automatic mode, the air conditioner will operate automatically according to the
factory settings. The set temperature cannot be adjusted and will not be displayed. Pressing the
"FAN" button will allow you to adjust the fan speed.
When you select cool mode, the air conditioner will run in cool mode. The cooling indiicator will
illuminate on the display. Press "+" or "-" to adjust the set temperature. Press the "FAN" button
to adjust the fan speed.
When you select dry mode, the air conditioner will run at low speed in dry mode. The fan speed
cannot be adjusted in this mode.
When you select fan mode, the air conditioner will operate only the fan, blowing air without
cooling or heating. Press the "FAN" button to adjust the fan speed.
.
When you select heat mode, the air conditioner will run in heat mode. Press "+" or "-" to adjust
the set temperature. Press the "FAN" button to adjust the fan speed.
3. +/- Button
Press "+" or "-" once to increase or decrease the set temperature by 1°C. Press and hold "+" or
"-" for 2 seconds to rapidly adjust the set temperature on the remote control. When set-up is
complete, release the button and the indoor unit's temperature indicator will change
accordingly.
When setting the TIMER ON, TIMER OFF, press "+" or "-" to adjust the time. (Please refer to
the relevant sections for TIMER ON and TIMER OFF buttons).
4. FAN button
Pressing this button will allow you to cycle through and set the fan speed: automatic AUTO,
SPEED 1 (
), SPEED 2 ( ), SPEED 3 ( ), SPEED 4 ):
AUTO -
- - -
Note that when you select AUTO, the unit will automatically select the most suitable fan speed
according to the factory settings. The fan will operate at low speed in dry mode.
5. SWING button
Press this button to turn on or off the oscillation of the flaps.
6. SLEEP button
In the cooling, heating and dehumidification modes, press this button to activate the sleep
function. Press this button to cancel the Sleep function. In the FAN and AUTO mode, this
function is not available.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Wall Mono 12000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Wall Mono 12000 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Wall Mono 12000

Argo Wall Mono 12000 User Manual - German - 28 pages

Argo Wall Mono 12000 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info