665682
2
Zoom out
Zoom in
Previous page
1/4
Next page
6
V 2/13
GENERAL SAFETY INFORMATION
Use this mosquito killer only as outlined in this manual. Any other use not recommended by the manufacturer may cause
fire, electric shock or injury to people.
Ensure that the mains power complies with the voltage specified on the mosquito killer’s data plate (220-240V~/50Hz).
This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.
This appliance is not suitable for use by people (including children) with reduced physical, sensory or mental abilities, or
without the necessary experience and knowledge, unless they have been adequately supervised and instructed
concerning use of the appliance by a person responsible for their safety.
Do not cover the appliance or restrict the air inlet and outlet grilles.
Ensure that all objects are at least 1 meter from the front and sides of the appliance.
Disconnect the mains power when the appliance is not used or for cleaning operations.
Avoid using the mosquito killer in dusty environments or in the presence of inflammable vapors (e.g. in workshops or
garages) or paint vapors.
Do not place anything on the appliance, do not use the appliance to dry clothing.
Use the appliance in a well-ventilated area.
Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may
damage the appliance.
WARNING: ELECTRIC SHOCK DANGER. DO NOT TOUCH INTERNAL GRIDS.
The symbol below signals the above warning:
To avoid the risk of fire, do not block the grilles or tamper with them in any way while the mosquito killer operates.
Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be replaced by the
manufacturer, dealer or a similarly qualified person so as to avoid any safety risks.
Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact qualified technical
personnel to examine the appliance or perform any electrical or mechanical repairs.
The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the
appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.
Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth
rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.
To disconnect the mosquito killer, push the switch to OFF and remove the plug from the socket. Pull on the plug only.
Avoid pulling on the cord when disconnecting the mosquito killer.
Do not place any objects on the cord and do not bend it.
It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a single extension
cord to operate multiple appliances.
Do not immerse the cord, plug or any other element of the appliance in water or other liquids.
Do not touch the plug with wet hands.
Do not place the mosquito killer above or near another heat source.
The mosquito killer may cause the risk of fire if, while in operation, is covered by or comes into contact with inflammable
material including curtains, drapery, blankets, etc.
KEEP THE MOSQUITO KILLER AWAY FROM THESE
MATERIALS.
Do not connect the appliance to the mains power before it has been properly assembled and positioned.
Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place the cord far
away from busy areas or where it cannot be accidentally pulled-out.
Installing suspended: keep a safe distance from the floor and place the mosquito killer in an area where it cannot be
accidentally bumped.
Do not operate the mosquito killer in close proximity to bathtubs, showers, washbasins or pools.
Do not position the mosquito killer below a socket outlet.
Do not operate the appliance outdoors.
WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF
DISCONNECTING POWER. WHEN SERVICING OR MOVING THE MOSQUITO KILLER, ALWAYS
UNPLUG THE POWER CORD.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Vespertilio at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Vespertilio in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info