4
EG
01. Infrared rays remote control unit
02. Monitor panel
03. Supply air deflector
, 4. Return air grille
, 5. Outdoor unit
06. Flexible tube
07. Air filter
08. Electric cable with plug
09. Service tube for condensate evacuation
10. Outdoor unit basket or support
11. Quick coupling cover
MONITOR PANEL
1. TIMER lamp: This lamp lights up when the system is
being controlled by the timer.
2. OPERATION lamp: This lamp lights up during operation.It
blinks once to announce that the remote control signal
has been received and stored.
This lamp flashes and the air conditioner simultaneously
stops during exceeding condensate drainage or because
of malfunctioning of the condensate drainage system.
The OFF position does not disconnect the power. Use the
main power switch to turn off power completely.
WARNING
WATER-LEVEL ALARM
5. Operation button (without remote control): Push the
button to walk through the OFF and COOL operation
modes.
PRODUCT IDENTIFICATION
10
2
7
11
5
6
1
8
3
4
9
1
5
2
4
3
3. STANDBY lamp: this lamp lights up when the air
conditioner is connected to the power and ready to receive
the remote control command.
4. Receiver : receives signals transmitted from the remote
control.
NOTE
The fixed OPERATION lamp and the blinking of TIMER and
STANDBY lamps, indicates that the operating mode selected
( ) is not compatible with the unit. If this happen the air
conditioner does not operate until the correct mode is
selected.