665455

Argo SOFTY Plus Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
27
V 10/16
(1)ON/OFF BUTTON
Press the ON/OFF button to switch the unit on or off.
When switched on, the appliance will start operating in the last mode set (save function).
(2) TEMPERATURE AND TIMER BUTTON
Increase temperature :
1) Allows for adjusting the desired temperature in cooling mode.
2) Whenever the
button is pressed, the set temperature increases by 1 °C.
Decrease temperature
:
1) Allows for adjusting the desired temperature in cooling mode.
2) Whenever the
button is pressed, the set temperature decreases by 1 °C.
The same button is used for setting the TIMER.
(3)MODE SELECTION BUTTON (MODE)
Press this button to select the various operating modes, according to the following sequence:
Cooling (Cool) → Dehumidification (Dry) → Heating (Heat) (enabled only on model Softy plus) → Ventilation (Fan Only) →
Auto
(4) SCREEN BUTTON
Used for switching the LCD on or off.
(5)SLEEP BUTTON
Press this button to activate the Sleep function, which automatically adjusts the temperature to changes in body and
room temperature during the night, for optimal sleeping comfort and minimal consumption.
In cooling mode, the temperature increases by 1 °C in an hour then by 2 °C in two hours, and remains in this setting for
the whole period. The Sleep function is not available in the ventilation, dehumidification and auto modes. When Sleep
function is set, control panel display switches off , to not disturb sleeping in the night.
In heating mode, the temperature decreases by 1 °C in an hour then by 2 °C in two hours, and remains in this setting
for the whole period. The Sleep function is not available in the ventilation, dehumidification and auto modes. When
Sleep function is set, control panel display switches off , to not disturb sleeping in the night.
After 7 hours of operation in SLEEP mode, the air conditioner switches off automatically.
Note: press MODE and ON/OFF together to cancel the SLEEP function setting on the remote control.
(6) FAN SPEED BUTTON (SPEED)
Press this button when the appliance is on to adjust the fan speed to Low, Medium, High or AUTO.
The fan speed cannot be adjusted in DRY mode and is set to low speed.
(7) SWING BUTTON
Press this button to let the horizontal fins swing automatically; after setting the desired fin angle, press the button again
to lock the angle.
(8) FEELING BUTTON
Activates the sensor on the remote control: the word ROOM will appear on the remote control.
The LCD will show the room temperature; when the function is cancelled, it will show the set temperature. This function
is disabled in the FAN mode.
(9) TIMER BUTTON
Select the function from the remote control: the relevant LED will light up.
Press the timer button again on the remote control, without deselecting the LED on the unit.
Next, select the time remaining to on or off.
1）Timer-on (automatic switch-on)
When the appliance is off, this button is used to set a delay after which the unit will switch itself on.
Remote control: Press TIMER. The T-ON and H icons will light up on the remote control. Press the + and -
buttons within 5 seconds to set the delay. The T-ON icon will remain on to indicate that the TIMER is running.
Unit: Press TIMER. Select a number of hours from 0.5 to 24. Press the TIMER button to confirm.
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

argo-softy-plus

Reset search

  • Bonjour
    Le climatiseur Softyplus affiche P1 ou PI
    Que dois-je en penser?
    Cordialement Submitted on 22-9-2021 at 10:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo SOFTY Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo SOFTY Plus in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo SOFTY Plus

Argo SOFTY Plus User Manual - German - 17 pages

Argo SOFTY Plus User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info