665654
4
Zoom out
Zoom in
Previous page
1/6
Next page
10
V 01/12
HOW TO USE THE APPLIANCE
The appliance does not need to be installed.
Position the unit on a flat, stable surface and connect the power cord to a suitable power socket (230 V~): you will hear a
sound to indicate that the appliance is in standby and can be switched on using the START/SPEED button. The unit can
be switched off using the OFF button.
This product can be used either as a fan, with 3 modes (Normal, Natural and Sleep) and 3 fan speed options (low,
medium and high), or as a cooler/humidifier: in this case the rear tank should be filled with demineralized water, up to but
not exceeding the maximum level as indicated. When the water in the tank falls below the minimum level (marked on the
tank), the appliance emits a continuous sound for 10" to signal a low water level, then cooling mode is stopped. The unit
automatically shuts down when the tank is removed.
The fan takes in air from the room and passes it through the dust filter and the evaporative panel, which is constantly
humidified thanks to a system which draws water from the tank and sprays it onto the panel. The incoming hot air makes
part of the water contained in the panel evaporate and is therefore cooler when released back into the room, which makes
it feel as though the temperature has dropped.
CONTROL PANEL and AVAILABLE FUNCTIONS
MODE button
FAN MODE SELECTION (Natural, Sleep)
Press this button once to switch from "Normal" mode, activated by default when the START/SPEED button is pressed, to "Natural" mode
. Press the button a second time to move to "Sleep" mode
. Press a third time to exit the fan mode selection procedure: the
corresponding LEDs light up accordingly.
In each of the 3 modes, it will then be possible to select the desired speed: High (3), Medium (2) or Low (1).
The “Natural” mode has 3 fan levels (1, 2, 3), each with different periods in which the high, medium and low speeds alternate, in order to
create a very natural type of ventilation.
An example of this is illustrated on the graph below.
10S 5S 10S 5S 3S 10S 5S 5S 3S 5S5S 5S 3S T=74S
5S 5S 5S 5S 5S 5S 5S 5S
5S 5S 5S 5S 5S 5S 5S10S 10S 10S
10S 10S 10S3S 3S
3S 3S 3S T=74S
T=76S
10
15
25
30
33
43
48
53
56
61
66
71
5
10
15
20
25
30
33
43
53
56
61
71 71
66
56
51
48
43
38
28
18
15
10
5
The “Sleep” mode has 3 fan levels (1, 2, 3), each with different periods in which the high, medium and low speeds alternate in Natural
mode, in order to create a very natural type of ventilation at night.
Sleep mode - Level 3 (high) : 30’ in Natural mode level 3 + 30’ in Natural mode level 2; then continues in Natural mode level 1.
Sleep mode - Level 2 (medium) : 30’ in Natural mode level 2, then continues in Natural mode level 1.
Sleep mode - Level 1 (low) : Natural mode level 1 only.
minutes
START/SPEED button
In standby mode, press this button to start the
appliance, which in 3" will reach its lowest fan
speed level (1); the corresponding LED will
light up. The appliance is set by default to run
in "Normal" mode. Press this button again to
change the fan speed.
1 (low)- 2 (medium) - 3 (high)
COOLER/HUMIDIFIER button
(COOLING/HUMIDIFICATION)
Press this button to activate the "Cooler/Humidifier" mode: the LED
lights up. The fan speed will automatically change to low (1). 5
minutes later, the fan mode and fan speed selected before this mode
was activated will be restored: at this point it will be possible to
change the mode and fan speed set previously, using the MODE
and START/SPEED buttons respectively.
SWING button
(ROTATION)
Press this button to activate
rotation of the round air delivery
grille. Press this button again to
stop rotation. The corresponding
LED lights up and switches off
accordingly.
TIMER button
Press this button to start the operating timer for a period
of time between 0.5 and 7.5 hours: every time the button
is pressed, the time will increase by half an hour. It is
deactivated by continuing to press it until the time
disa
pp
ears.
OFF button
Press this button to exit all
functions and enter standby
mode.
Level 2 (medium)
Level 1 (low)
H
M
L
stop
H
M
L
stop
Level 3 (high)
H
M
L
stop
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Polifemo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Polifemo in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Polifemo

Argo Polifemo User Manual - German - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info