665657

Argo Polifemo Class Manual

8
Zoom out
Zoom in
Previous page
1/10
Next page
18
V 12/16
TIMING BUTTON
a. After turning on, the timer indicator is turned off by default and the digital tube displays ambient temperature; when the
button is first pressed, the timer sets to 30 minutes; the time increases by 30 minutes when the button is pressed every
time, and the timer can be set up to 8 hours; if the button is pressed again, the digital tube displays 00, and the timer
turns off; press the button again to repeat the cycle;
b. After setting the time, the digital tube displays the ambient temperature, and "C "indicator turns on. During the last 30
minutes, the digital tube displays remaining time and enters standby state after reaching specified time.
PROTECTION FUNCTIONS
- Water pump protection
When the software detects water shortage for few seconds, the cooling function stops working, the ventilation function
keeps going on and the buzzer sends bibi alarm sound.
Press the Cooling/Humidify button for three times within three seconds after power on. Take out the tank and fill it as
described in the section "Filling the water tank".
- Water tank extraction protection
When the water tank is extracted, the machine power is cut off and the buzzer sends BiBi sound and it stops working.
When the water tank is put back, the buzzer sends BiBi sound, and the power enters standby mode.
- Smart memory for unexpected power outage
When the power is restored after unexpected power outage, the appliance sends "bi" sound; after 30 seconds, it resumes
the previous state and all functions are restored.
- Auto power-off function
If the device has been running for 15 hours continuously in default state after power on and there is no operation, it
automatically turns off. If you want to cancel this function, press and hold the Cooling and the Mode button for 3 seconds
simultaneously; the buzzer sends Bi sound and cancels auto power-off function; press and hold the two buttons again, the
buzzer sends Bi sound and resumes auto power-off function.
HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below)
Open the battery cover on the back of the remote control (press and pull the cover).
Place the battery inside the cover, making sure the polarity is correct.
Slot the cover back into position on the remote control.
Use Lithium/Manganese button cells, model no. CR2032 -3 V, compliant with Battery Directive no. 2006/66/EC (supplied
with the remote control).
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN DIRECTIVE
2006/66/EC
Please replace the battery when its electrical charge has been exhausted: at the end of its useful life, it must not be disposed of
together with unsorted waste. It must be must be delivered to appropriate separated waste disposal plants or to dealers that
provide a similar service. Separate waste disposal of batteries prevents potential negative effects on the environment and human
health resulting from inadequate disposal, and also allows the materials from which it is made to be recovered and recycled in
order to achieve significant savings in terms of energy and resources. The separate disposal obligation is underlined by the
crossed-out dustbin symbol appearing on the battery. Illegal disposal of the product by the user shall result in the application of
administrative sanctions as defined by current regulations.
… 8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Polifemo Class at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Polifemo Class in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Polifemo Class

Argo Polifemo Class User Manual - German - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info