665506
7
Zoom out
Zoom in
Previous page
1/8
Next page
15
V 05/16
he appliance is fitted with an anti tip-up device that prevents it from operating when it detects that the product is inclined.
Do not position the appliance on its side or upside down.
WARNING: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE.
WHEN YOU TURN THE APPLIANCE ON AGAIN, AFTER SWITCHING IT OFF BY MEANS OF THE BUTTON
ON/OFF AND REMOVING THE PLUG FROM THE SOCKET YOU HAVE TO RESET THE DESIRED MODE
(ECO/COMFORT), TEMPERATURE AND OSCILLATION FUNCTION (SWING).
The remote control uses Lithium/Manganese button cells, model no. CR2032 -3 V, compliant with Battery Directive no.
2006/66/CE (supplied with the remote control).
REMOTE CONTROL
Buttons
Mode selection button
ECO or COMFORT
TIMER / TEMPERATURE
button
ON/OFF
button
SWING button
ON/OFF buttons
Touching the ON/OFF button will cause the
LED to light and the appliance will begin to
operate in COMFORT mode. Touching the button
ON/OFF once again the mode selection LED will
switch off. To switch off the fan heater completely,
place the on/off button in the “0” position.
ECO/COMFORT selection button
- ECO mode: 1400 W reduced power to
save energy
- COMFORT mode: maximum heating
power (2400W)
ECO is the default mode.
SWING button
When the unit is operating, touch the
SWING button to make the appliance
oscillate automatically, shifting the air flow
from left to right. The LED
is switched
on simultaneously.
Touch the SWING button once again to
interrupt the oscillation and switch off the
LED.
SET - TIMER / TEMPERATURE button
When the appliance is operating, the operating time can be set by
touching this button:
the timer display shows a flashing 0 and the
buttons can be operated to set the desired time, between 1 and 12 hours,
with each touch corresponding with 1 hour. The display shows the set
time: wait 5” for the setting to be confirmed. The unit will switch off
automatically at the end of the programmed time.
After the timer has been set, touching the button once again will allow you to
set the temperature: the display will show ambient temperature and, by
operating the buttons, the desired temperature can be set between 15
and 35°C. Once the desired temperature has been set, wait 5” for the setting
to be confirmed. After 5” the display will show the ambient temperature once
again. If no settings are made, the default temperature is 25°C.
The default temperature is 25°C.
Buttons
Allows you to adjust the
temperature and timer settings of
the appliance.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Metal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Metal in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Metal

Argo Metal User Manual - German - 8 pages

Argo Metal User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info