805050
16
Zoom out
Zoom in
Previous page
1/41
Next page
V 12/21 57
(4) FAN SPEED ADJUSTMENT BUTTON (on control panel and on remote control)
On control panel, touch this button when the appliance is switched on for adjusting the ventilation accordingly the following
sequence:
On remote control, press this button to adjust the fan speed in the following sequence:
Auto (automatic ventilation) -> Low speed (low ventilation speed) -> Medium speed (medium ventilation speed) -> High
speed (high ventilation speed) -> Auto
Fan speed cannot be adjusted in DRY mode and is fixed at low.
When Auto fan speed is selected, the unit automatically adjusts the fan speed according to the factory settings.
In Dry mode the fan speed is fixed at low speed.
X-FAN function: Press and hold the fan speed button (FAN) for 2 seconds in COOL (cooling) or DRY (dehumidification)
mode, the icon appears and the fan continues to run for a few minutes to dry the inside of the unit, even if the power
has been turned off. When the unit is turned on, the X-FAN mode is not active. This function is not available in AUTO, FAN
and HEAT modes.
This function is used to dry the condensation that forms inside the appliance after it has been turned off, thus avoiding the
formation of mold.
After setting the X-FAN function, turn off the device with the ON / OFF button, the internal fan continues to operate for a
few minutes at low ventilation speed, if you want to stop the fan, keep the SPEED button pressed for 2 seconds.
(5) WIFI BUTTON (on control panel and on remote control)
On control panel touch this button to turn on/off the WiFi function. When the WiFi is on the LED is lighted on.
To reset WiFi settings hold this button for 10 seconds.
On the remote control, press the Wifi button to activate or deactivate the Wifi function, the corresponding icon on the
display will appear.
When the unit is off, press and hold the MODE and Wifi buttons simultaneously for 1 second to reset the Wifi to the factory
settings.
(6) SWING BUTTON (on control panel and on remote control)
On control panel touch this button to swing the flap automatically up & down, and when you have selected the desired
angle, press again to lock them in the desired angle.
On remote control press this button to swing the flap up & down, accordingly the following sequence:
When the SWING button is selected, the symbol appears on the remote control display and the flap swings in the
following sequence:
(7) TEMPERATURE AND ERROR DISPLAY ON CONTROL PANEL
With the exception of message H8, tank full, when an error occurs do not try to repair the air conditioner, always take it to
an Argoclima Service Center, otherwise the guarantee will no longer be valid.
Problem Cause Solution
H8 Tank full of water. Empty the tank.
If the problem persists, contact a service centre.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Maxime Plus EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Maxime Plus EU in the language / languages: English as an attachment in your email.

The manual is 3.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Maxime Plus EU

Argo Maxime Plus EU User Manual - German - 43 pages

Argo Maxime Plus EU User Manual - French - 43 pages

Argo Maxime Plus EU User Manual - Italian - 41 pages

Argo Maxime Plus EU User Manual - Spanish - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info