665675
6
Zoom out
Zoom in
Previous page
1/17
Next page
6
INSTRUCTIONS
A detailed diagram can be found on the last page.
1. Place the diffuser on a flat, stable surface, away from the edge.
2. Remove the cover.
3. Fill the reservoir with mineral water
(bottled water or tap water); do not exceed the maximum water level – 300 ml
(indicated by the word MAX in red letters).
4. Then add a few drops of water soluble fragrance
(3-6 drops) to the water tank.
5. Replace the cover on the diffuser.
6. Plug the connecting cable into the DC-jack located on the rear of the diffuser.
7. Plug the adaptor into the power supply.
MAINTENANCE
It is recommended to change the water in the reservoir frequently and to clean the diffuser regularly, especially if you wish
to change the aroma.
1. Turn off and unplug the device.
2. Remove the cover and empty the water from the reservoir. Empty the water using the water spout, on the left of the
air outlet. Do not empty the water in the air outlet, this would damage the diffuser .
3. Clean the interior of the diffuser with a soft tissue and a little water. If necessary, use some heavily diluted vinegar. Do
not use corrosive detergents. Gently wipe the ceramic disc with a cotton bud, being careful not to scratch it.
尺寸:143x210mm
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Joy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Joy in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info