724766
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
EN
9
Num. Description Unit
Default value Range
Incre-
ment
Value description Notes
Floor Fan coils Radiators Min. Max.
P201 Planttype
(zone2)
- 0 1 2 0 2 1 0=Underoor
1=Fancoil
2=Lowtemperatureradiators
WhenP201ischanged,P205/P206/P220/P221
P223areresettothecorrespondingdefaultvalue.
P205 Maximumclimaticcurve
setpoint(zone2)
°C 35 45 50 30 55 0,5 Onlyforheatingmode
See graph “CLIMATIC CURVE”
P206 Minimumclimaticcurve
setpoint(zone2)
°C 20 35 40 20 40 0,5 See graph “CLIMATIC CURVE”
P220 Temperatureformaximum
setpoint(zone2)
°C -7 -7 -7 -20 P221 0,5 Settotheminimumexpectedregionaltemperature
See graph “CLIMATIC CURVE”
P221 Temperatureforminimum
setpoint(zone2)
°C 17 17 17 P220 +35 0,5 IfP221<P220,P220isautomaticallysettoP221
See graph “CLIMATIC CURVE”
P223 Cooling setpoint
(zone2)
°C 23 12 - 10 30 0,5 Incoolingmodethesetpointisxedanditcorresponds
to P223
P230 Calculatedsetpoint
(zone2)
°C
- - -
Readonly
P231 Lowestcoolingsetpoint
with0-10Vcontrol
(zone2)
°C 23 12 - 10 P232 0,5 ActiveonlyifP250=1,itcorrespondstoasignalof10V.
See graph “0-10V CONTROL”
P232 Highest cooling setpoint
with0-10Vcontrol
(zone2)
°C 30 30 - P231 30 0,5 ActiveonlyifP250=1,itcorrespondstoasignalof0V.
IfP232<P231,P232isautomaticallysettoP231
See graph “0-10V CONTROL”
P250 0-10Vsignalfunction
(zone2)
- 0 0 0 0 2 1 0=Disabled
1=Thermalload
2=Setpointcommand
IfP250=3or4,0-10Vsignalisreadonoutdoorunit
onlyandsignalsonzone1and2willbeignored.
See graph “0-10V CONTROL”
P251 Maximum0-10Vsetpoint
shift
°C 5 5 5 1 10 0,5 ActiveonlyinheatingmodeandifP250=1.
Itrepresentstheshiftonthesetpointwithasignalof
10V.(Seegraph“0-10VCONTROL”)
P252 Manualsetpointshift °C 0 0 0 0 10 0,5 Climaticcurvemanualsetpointshiftinheatingmode
P260 Mixingvalvedelay sec 60 60 60 30 300 5
P261 Mixingvalvecontroltype - 0 0 0 0 1 1 0=230Vaccontrol(2or3points)
1=0-10Vcontrol
• Tosetzone2useparametersfromP201toP261.
3.2.3 - SETTING OF ZONE 2
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo IM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo IM in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo IM

Argo IM User Manual - German - 12 pages

Argo IM User Manual - French - 12 pages

Argo IM User Manual - Italian - 12 pages

Argo IM User Manual - Portuguese - 12 pages

Argo IM User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info