Manual Argo Hydrokit (page 15 of 25) (English)

665484

Zoom out

Zoom in

1/25

4.3.5 - ROUTING OF CABLES

• To avoid problems related to electromagnetic disturbances, avoid routing control cables near power cables.

• Pass the cables through the cable glands.

• Route the control cables on the right side of the electric board.

• Pass the pilot wire (230 V), if used, on the left side of the electric board.

BUS

Outside air temperature sensor

ECO signal for remote controls

Load shedding signal

Outdoor unit control connection

Pilot wire for electric convectors

Power supply

Bottom view of the indoor unit

5 - ACCESSORIES

5.1 - WATER CONNECTION HOSES

• Length 1 m, insulated, female:

- Ø 1” code 70600055

6 - STARTING

Before carrying out any work on the installation, make sure that first the outdoor unit is disconnected

and then the hydrokit and that access to it is prevented.

Any work must be carried out by personnel qualified and authorised to work on this type of machine.

IMPORTANT NOTE

Also refer to the installation instructions provided with the outdoor unit.

6.1 - PRELIMINARY CHECKS

6.1.1 - COOLING CIRCUIT

• Refrigeration couplings correctly tightened.

• Both of the outdoor unit's shutoff valves are open.

• integrity of the cooling circuit (per Decree of 7 May 2007).

• Also refer to the verifications indicated in the outdoor unit's installation instructions.

6.1.2 - HYDRAULIC CIRCUIT

• Hydraulic couplings correctly tightened.

• Hydraulic circuit operating correct:

- purge of circuits,

- position of valves,

- hydraulic pressure (1.5 to 2.5 bar).

• Integrity of the hydraulic circuit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Argo Hydrokit in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Hydrokit

Argo Hydrokit User Manual - English - 14 pages

Argo Hydrokit Installation Guide - German - 25 pages

Argo Hydrokit User Manual - German - 14 pages

Argo Hydrokit Installation Guide - French - 25 pages

Argo Hydrokit User Manual - French - 14 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Argo Hydrokit Manual

Product: