805098
6
Zoom out
Zoom in
Previous page
1/10
Next page
16V 05/22
Connect the power cord to an appropriate power outlet (220-240V ~ /50-60 Hz). Press the power button located
on the back of the fan heater.
If no selections are made on the control panel, after 5 minutes the display goes into stand-by mode and all LEDs on
the control panel go out. To exit stand-by mode and reactivate the LEDs, touch the control panel again.
ON/OFF BUTTON
Touch this button on the control panel or remote control to turn the fan heater on or off.
SWING BUTTON
Touch this button on the control panel or on the remote control to activate the horizontal oscillation of the fan heater, the
corresponding LED lights up on the control panel. To deactivate the swing function, touch this button again.
TIMER BUTTON
Touch the Timer button on the control panel or remote control to select the operating interval in the following circular
sequence 0h (disable Timer), 1h, 2h, 3h ... up to 12 hours. Each time the button is touched, the adjustment interval
will be 1 hour. When the Timer function is activated, the time remaining before shutdown appears on the display. LED
H lights up on the control panel.
MODE BUTTON
Touch this button on the control panel or remote control to select the heating mode in the following circular sequence:
Cool (ventilation mode) - Low (ECO heating mode 1300 W) - High (COMFORT heating mode 2000 W)
The corresponding LED lights up on the control panel according to the selected mode.
TEMP BUTTON
Touch this button on the control panel to set the desired temperature from 15°C up to 40°C; at each touch the
temperature increases by 1°C. After setting the temperature, the selected temperature will ash on the display for 3
seconds, then the room temperature will be shown. When the set temperature is reached, the unit automatically goes
into ventilation mode reducing to a minimum the air ow.
AUTO FUNCTION: in the absence of a specic mode selection, the AUTO function comes into play, which
automatically adjusts the mode and therefore the heat supplied according to the gap between the set temperature
and the room temperature: up to 2 °C of gap, the unit works in ECO mode, beyond the 2 °C difference the unit will
work in COMFORT mode. When the set temperature is reached, the electrical resistance turns off: the unit continues
to ventilate at very low speed to maintain good air diffusion in the room. If, on the other hand, you select the mode,
the unit will operate according to the set mode. On the remote control, press the + (UP) and - (DOWN) keys to set the
temperature. the °C LED lights up on the control panel.
CONTROL PANEL AND REMOTE CONTROLLER
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Homer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Homer in the language / languages: English as an attachment in your email.

The manual is 0.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Homer

Argo Homer User Manual - German - 11 pages

Argo Homer User Manual - French - 10 pages

Argo Homer User Manual - Italian - 9 pages

Argo Homer User Manual - Spanish - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info