665613
8
Zoom out
Zoom in
Previous page
1/9
Next page
V 09/16
17
(220-240V/50Hz).
Turn the side dial of the thermostat to the maximum (max. temperature).
Now choose the power level desired by using the switches as appropriate:
If both switches are in the ‘0’ position, i.e. off, the panel is off.
By turning the switches to ‘I’ or ‘II’ or ‘III’, the panel turns on and operates at ‘minimum’ or ‘medium’ or ‘maximum'
level. The red switch in the on position, lights up.
.
Room temperature can be regulated by rotating the thermostat clockwise to increase or anticlockwise to
decrease temperature.
When turning the panel on, we recommend turning the thermostat dial to maximum: then, when a pleasant room
temperature has been obtained, turn the thermostat dial anticlockwise until the light of the active switch goes out. This
way the panel will maintain that room temperature constant.
OVERHEATING SAFETY DEVICE
In the event of overheating, the panel protection system automatically disables the heating elements, turning the
appliance off.
To understand whether it has turned off due to intervention by this system, rotate the thermostat switch to maximum to
verify that the thermostat has not simply turned the convector off due to having reached the set temperature.
Should the appliance not return to normal operation due to the safety device having intervened:
1. turn the panel off;
2. remove any cause of overheating (e.g. obstacles on the air outlet or intake grille, dust deposits in the appliance, etc.
);
3. leave the appliance to cool for 15 – 20 minutes;
4. turn the panel on again.
CLEANING THE PANEL HEATER
Always unplug and leave the panel to cool before cleaning.
Use a damp cloth to clean the panel exterior and remove dust. Leave the casing to dry before using the appliance
again.
Do not allow water to enter the panel.
Do not use benzene, solvents or abrasive compounds to clean the panel, as these may damage the casing.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
Ensure that the panel is dry before inserting the plug.
Do not use metal tools to clean the panel. Any metal fragments that may detach may come into contact with the
panel’s electrical components and cause a short-circuit.
In the event of malfunctions or damages, always contact an authorised service centre.
By setting the left-hand switch to
the ‘I’ position and leaving the
right-hand switch set to ‘0’, minimum
power is selected: 500 W
By setting both switches to
the ‘III’ position, maximum
power is selected: 1500 W
By setting the right-hand switch to
the ‘II’ position and leaving the left-
hand switch set to ‘0’, medium power
is selected: 1000 W
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Hi Floor Ray at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Hi Floor Ray in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Hi Floor Ray

Argo Hi Floor Ray User Manual - German - 9 pages

Argo Hi Floor Ray User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info