805094
9
Zoom out
Zoom in
Previous page
1/30
Next page
40V 11/22
3. SPEED BUTTON
Press this button, you can select the fan speed as follows:
Note: AUTO air speed is not available in FAN mode.
4. DISPLAY BUTTON
It is possible to turn the remote control display on or off, while the unit is running, to extend the life of the batteries.
5. iFEEL BUTTON
Pressing this button activates the IFeel function. The LCD screen shows the room temperature and when the function
is canceled it shows the set temperature. This function is not active in AUTO and FAN mode.
6. TIMER BUTTON
When the air conditioner is on, press this button to deactivate the TIMER function, or when it is off to activate it.
When the button is pressed, the display will show “ON (OFF)” ashing. It is possible to press the “ and “
“ buttons to set the timer, each press will increase or decrease the timer by 0.5 h up to 10 h, then the time
interval will be 1h. The settable range is 0.5-24 h. Press the “TIMER” button again to activate the function, the
“ON (OFF)” symbol will stop ashing. If the “TIMER” button is not pressed for 10 seconds while the “ON (OFF)”
symbol ashes on the display, the TIMER function will be canceled. If the TIMER function is active, pressing this
button will deactivate it.
Note: when the TIMER function is active, all function buttons (except SLEEP, DISPLAY and iFEEL) are usable.
7. HEALTH/iCLEAN BUTTON
This button has two functions:
HEALTH: function not available.
iCLEAN: When the remote control is off, press the “iClean” button to activate the “iClean” function with a
maximum duration of 30 minutes. The purpose of this function is to clean the evaporator from dust, dry the
water inside the evaporator and prevent the formation of mold which can cause the spread of bad odors.
After setting the “iClean” function, press the “iClean” button again to cancel the function or press the ON/
OFF button to cancel the “iClean” function and turn on the appliance. The “iClean” function is deactivated
after 30 minutes of operation if no operation takes place.
Note: the iClean function can be set in parallel with the “Timer on” function; in this case, the “Timer on”
function will be executed after the “iClean” function.
8. BUTTONS
Press the / button to adjust the temperature from 16 °C to 32 °C; the screen will change each time the
button is pressed. Each time you press “ “ the temperature will increase by 1 °C and each time you press “
“ the temperature will decrease by 1 °C.
Note: the temperature cannot be set in AUTO and FAN mode, so these two buttons will have no effect.
9. TURBO BUTTON
Press this button only in COOL or HEAT mode to select the TURBO function and set the maximum fan speed. When
TURBO mode is active, the fan is at maximum speed; When TURBO mode is off, the dispensing speed is restored
to the previous state.
10. MODE BUTTON
Press this button, you can select the running mode as follows:
Note: HEAT mode is not available for cool only units.
11. SLEEP BUTTON
When you press the SLEEP button, the display turns off.
After setting the Sleep mode, in the cooling function, the temperature will increase by 1 ºC in an hour, then
automatically increase by 1 ºC again after another hour. After setting the Sleep mode, in the heating function, the
temperature will decrease by 2 ºC after an hour, then automatically decrease by 2 ºC again after another hour.
After 10 hours of operation in SLEEP mode the air conditioner returns to the previous functions and automatically
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Hi-comfort Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Hi-comfort Plus in the language / languages: English as an attachment in your email.

The manual is 3.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Hi-comfort Plus

Argo Hi-comfort Plus User Manual - Italian - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info