805110
7
Zoom out
Zoom in
Previous page
1/13
Next page
V 05/21
20
1. Turn the convector upside down 2. Insert the feet. The longest
part must be positioned behind
on the rear the convector.
3. Tighten the wing nuts on the feet.
B. Wall-mounting: how mount the convector onto the wall
The convector packaging contains all the accessories necessary for wall-mounting.
To wall-mount, proceed as follows. The appliance has already attached the bracket to the rear of the product, so
remove it from the convector following these steps:
1. Unscrew the two screws located on the upper part of the two vertical bars of the wall bracket.
2. Pull out the wall bracket by pressing down on the top of the two vertical bars of the wall bracket.
3. Remove the wall bracket completely from the convector.
After removing the bracket, proceed as follows (figure below):
A. By placing the bracket against the wall, mark on the wall with the pencil the points where to make the holes to
insert the fisher. Respect the minimum distances of the convector from the walls.
B. Drill the 8mm diameter holes in the wall and insert the fisher.
C. Attach the bracket to the wall and screw the supplied screws into the fisher.
D. Position the unit straight so that the holes are aligned with the bracket and insert the parts of the bracket into the
holes on the back in the upper part of the convector. Make sure that the convector is firmly hooked to the bracket
by gently pulling it.
Tighten the screws at the top of the convector firmly.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Fancy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Fancy in the language / languages: English as an attachment in your email.

The manual is 0.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Fancy

Argo Fancy User Manual - German - 13 pages

Argo Fancy User Manual - French - 13 pages

Argo Fancy User Manual - Italian - 13 pages

Argo Fancy User Manual - Portuguese - 12 pages

Argo Fancy User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info