665482
18
Zoom out
Zoom in
Previous page
1/29
Next page
18
EG
HOW TO DISCONNECT AND/OR REMOVE EMIX TANK UNIT
How to disconnect the refrigerant circuit
In case of Emix Tank is connected to a normal indoor unit port, (for example with G30 or G42) the unit must be discon-
nected exactly as any other indoor unit. On the outdoor unit, electrically disconnect the reversing valve to force the
system in cooling.
In case of Emix Tank is connected to the Emix port and by any reason it has to be disconnected and replaced, the installer
has to do this procedure using a refrigerant recovery unit:
close the valves of Emix port that connect Emix Tank to outdoor unit;
connect the refrigerant recovery unit to one of the two valves;
recover the refrigerant inside the copper pipes and Emix Tank unit;
disconnect Emix Tank;
reconnect another Emix Tank unit;
make the vacuum;
restore the refrigerant from recovery unit to the pipe and Emix Tank unit;
disconnect the recovery unit;
re-open the valves of Emix port that connect Emix Tank to outdoor unit.
In case of Emix Tank is connected to the Emix port and by any reason it has to be removed de nitively, the installer has
to do this procedure using a refrigerant recovery unit:
close the valves of Emix port that connect Emix Tank to outdoor unit;
connect the refrigerant recovery unit to one of the two valves;
recover the refrigerant inside the copper pipes and Emix Tank unit;
disconnect Emix Tank;
reconnect the bypass disconnected during the  rst installation;
disconnect the recovery unit;
make the vacuum on the bypass;
re-open the valves of Emix port that connect Emix Tank to outdoor unit;
switch on the outdoor unit in cooling mode;
recover the refrigerant inside the system connecting the recovery unit to one of the liquid valve of indoor units or to
the pressure valve of the inlet tube;
disconnect the recovery unit.
How to empty the water tank
In case Emix Tank has to be removed or replaced, proceed as
follows to empty the water tank:
close the water inlet valve of Emix Tank;
open the sinks’ taps of users connected to Emix Tank. Al-
ternatively, open the vent valve placed on the top of the
tank;
connect to tube 1 (see  gure) a discharge pipe for the water
contained in the tank;
the water will come out from the tank through the connect-
ed tube.
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN
DIRECTIVE 2012/19/EU
At the end of its working life this equipment must not be disposed of as an household waste.
It must be taken to special local community waste collection centres or to a dealer providing this service.
Disposing of an electrical and electronic equipment separately avoids possible negative effects on the environment
and human health deriving from an inappropriate disposal and enables its components to be recovered and recycled
to obtain significant savings in energy and resources.
In order to underline the duty to dispose of this equipment separately, the product is marked with a crossed-out dustbin.
1
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Emix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Emix in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Emix

Argo Emix User Manual - English, German - 30 pages

Argo Emix User Manual - German - 29 pages

Argo Emix User Manual - French - 30 pages

Argo Emix User Manual - French - 29 pages

Argo Emix User Manual - Italian, Portuguese, Swedish, Spanish, Finnish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info