805048
15
Zoom out
Zoom in
Previous page
1/23
Next page
38V 05/23
Wi function
With the unit switched on, on the control panel or on the remote controller, press and hold this button for 5
seconds to activate the Wi function. The icon ashes rapidly for about 2 seconds. After conguring and
connecting the appliance to the Wi network, the icon is always on on the control panel.
If the conguration does not take place correctly, the icon on the control panel will turn off within 2 minutes.
To deactivate the Wi function, press and hold this button for about 5 seconds on the remote controller or control
panel, the icon will turn off.
7. UP/DOWN BUTTONS
Press these buttons on the control panel or on the remote controller to adjust the temperature (each time you press
the temperature increases or decreases by 1°C) and set the Timer (each time you press the time increases or
decreases by 1 hour).
FUNCTIONS THAT CAN ONLY BE ACTIVATED BY REMOTE CONTROLLER
CHILD LOCK FUNCTION
With the unit on, on the control panel, press the Swing key and the Timer key simultaneously for 3 seconds to
activate or deactivate the control panel lock function.
The LED on the control panel lights up.
To deactivate this function, press and hold two buttons for about 3 seconds or switch the device off and on again.
On the remote controller, to activate or deactivate this function, press the LOCK button and the display will show
"Lo".
TEMPERATURE DISPLAY FUNCTION
On the remote controller, press the C°/F° key to change the temperature display from C° to F°. This function can
only be selected in cooling and heating modes. This function can also be activated from the control panel by
pressing the UP/DOWN buttons simultaneously for about 3 seconds.
DISPLAY LIGHTING
Press the Display button on the remote controller to turn the remote controller display light on or off.
MEMORY FUNCTION
In the event of a blackout, when restarted the unit operates in the same mode previously set.
TEMPERATURE DISPLAY AND ERRORS
The temperature set in cooling mode will appear on the display, while if the unit operates in dehumidication
mode, the room temperature will appear on the display.
Problem Cause Solution
E1 Room temperature sensor failure. Contact a service centre.
E2 Failure of temperature sensor on the
evaporator. Contact a service centre.
E8 Over temperature protection system Contact a service centre.
P1 Alarm of full water tank Connect the PVC pipe to the condensate
drain hole
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Einar Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Einar Plus in the language / languages: English as an attachment in your email.

The manual is 5.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Einar Plus

Argo Einar Plus User Manual - German - 23 pages

Argo Einar Plus User Manual - Italian - 23 pages

Argo Einar Plus User Manual - Spanish - 23 pages

Argo Einar Plus User Manual - Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info