724568

Argo ECOLIGHT SINGLE SPLIT Manual

37
Zoom out
Zoom in
Previous page
1/41
Next page
Please read this manual carefully before installing and using the air conditioner, and
retain for future reference.
V
09/19
USER MANUAL and INSTALLATION GUIDE
INDOOR UNIT OUTDOOR UNIT
ECOLIGHT 9000 UI (WIFI) ECOLIGHT 9000 UE
ECOLIGHT 12000 UI (WIFI) ECOLIGHT 12000 UE
ECOLIGHT 18000 UI (WIFI) ECOLIGHT 18000 UE
ECOLIGHT 24000 UI (WIFI) ECOLIGHT 24000 UE
ECOLIGHT
SINGLE SPLIT AIR
CONDITIONERS – R32
V 09/19
42
Contents
Information for use
The Refrigerant 43
Precautions for use 44
Description of components 46
Guide to the remote control and display
Remote control buttons 47
Getting to know the display icons 48
Getting to know the remote control buttons 48
Getting to know the button combination functions 51
Operating guide 52
Replacing the remote control batteries 52
WiFi Guide 53
Emergency operation 63
Maintenance
Care and cleaning 63
Troubleshooting
Possible faults and solutions 64
Analysing faults and solutions 66
Installation instructions
Installation warnings 68
Choosing a location for installation 68
Electrical connection requirements 69
Installation
Indoor unit installation 69
Outdoor unit installation 73
Post-installation checks 76
Testing and operation
Functional testing 77
Appendices
Piping configuration 77
Safety operation of flammable refrigerant 78
Procedure for extending the piping 79
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE
2012/19/EU
At the end of its working life this equipment must not be disposed of as an household waste. It must be taken to special local
community waste collection centres or to a dealer providing this service. Disposing of electrical and electronic equipment
separately avoids possible negative effects on the environment and human health deriving from an inappropriate disposal and
enables its components to be recovered and recycled to obtain significant savings in energy and resources. In order to
underline the dut
y
to dis
p
ose of this e
q
ui
p
ment se
p
aratel
y,
the
p
roduct is marked with a crossed-out dustbin.
V 09/19
43
The Refrigerant
To realize the function of the air conditioner unit, a special refrigerant circulates in the system.
The refrigerant is the fluoride R32 = GWP (Global warming potential). This refrigerant is
flammable and inodorous. It can lead to explosions under certain conditions, however the
flammability of this refrigerant is very low and it can be ignited only by fire.
Compared to other common refrigerants, R32 is a non-polluting refrigerant with no harm to
the ozonosphere and a lower effect upon the greenhouse effect. R32 has very good
thermodynamic features which lead to a really high energy efficiency. The units therefore
need less filling.
Warning:
Do not try to accelerate the defrosting process or to clean the appliance in different ways other than
those recommended by the manufacturer. Should repair be necessary, contact your nearest
authorized Argoclima Service Centre. Any repairs carried out by unqualified personnel may be
dangerous. The appliance has to be stored in a room that doesn’t have any continuously operating
ignition sources. (for example: open flames, an operating gas appliance or an operating electric
heater.) Do not pierce or burn.
Appliance has to be installed, operated and stored in a room with a floor area larger than X m2.
(Please refer to table "a" in section of " Safety Operation of Inflammable Refrigerant" for Space X.)
For repairs, strictly follow manufacturer’s instructions only for appliances filled with R32 flammable
gas. Be aware that refrigerants do not have any odour.
Appliance filled with flammable gas R32.
Before using the appliance, read the owner’s manual.
Before installing the appliance, read the installation manual.
Before repairing the appliance, read the service manual.
V 09/19
44
INFORMATION FOR USE
Precautions for use
WARNING
This product is not a toy. Children of less than 3 years should be
kept away unless continuously supervised.
This device is not intended for persons (including children aged
from 8 years and above) with reduced physical, sensory or mental
capabilities, or without the necessary experience and knowledge,
unless they have received the necessary supervision or instruction
concerning use of the appliance by a person responsible for their
safety.
Children aged from 3 and less than 8 years shall only switch on/off
the appliance provided that it has been placed or installed in its
intended normal operating position and they have been given
instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children aged from 3 years and
less than 8 years shall not plug in, regulate and clean the
appliance or perform user maintenance.
To prevent the risk of fire, do not connect the air conditioner to a
multifunction socket.
Always disconnect the power before servicing or cleaning the unit.
To prevent the risk of electric shock or malfunction, do not spray
water on the indoor unit.
Do not spill water on the remote control.
To prevent the risk of electrical shock or damage, do not attempt
to repair the air conditioner yourself. After performing the checks
in the troubleshooting section, contact an authorised service
centre.
Do not obstruct the inlet or outlet. Otherwise, a fault may occur.
Contact a qualified technician if it is necessary to move the air
conditioner to another location.
Do not climb on or place heavy objects on the top panel of the
outdoor unit. Otherwise, there is a risk of damage or personal
injury.
Do not put fingers or other objects in the air inlet/outlet grilles.
Otherwise, there is a risk of damage or personal injury.
The air conditioner must be properly earthed. Improper earthing
can cause electrical shock.
V 09/19
45
Always install a circuit breaker. Otherwise, a fault may occur.
The unit must be installed and serviced by a qualified technician.
Otherwise, there is a risk of damage or personal injury.
WARNING
In case of smoke or burning
smell, turn off the power supply
and contact the service center.
If the problem persists, the unit
could be damaged and cause
electrical shock or fire.
It is necessary that power supply
adopts the special circuit with
protection through an air switch
and ensure it has sufficient
capacity . The unit switches on
or off automatically according to
user needs: do not turn on or
turn off the device frequently
otherwise it could suffer harmful
effects.
Do not cut or damage the power
cords and control cables. If the
power cable and the cable of the
control signal are damaged, they
must be replaced by a
professional technician.
The power supply must be
equipped with a special circuit to
prevent fire.
Otherwise, it may result in fire or
electric shock.
Disconnect the power supply if
the air conditioner is not used for
a long time
Otherwise, the accumulation of
dust can cause overheating.
Do not damage the power cord
or use an unauthorized cable.
Otherwise, it may cause
overheating or fire.
When cleaning the unit, stop
operation and turn off the power.
Otherwise, may occur electric
shock or damage.
The voltage rating of this product
is 220 - 240V, 50Hz. The
compressor vibrates strongly if
the voltage is too low, causing
damage to the cooling system.
The electrical components are
easily damaged if the voltage is
too high.
Do not attempt to repair the air
conditioner yourself.
An improper repair can cause
fire or electric shock. For this
reason, it is advisable to contact
a service center for repairs.
Check if the installed media is
sufficiently stable.
If damaged, it can cause the
equipment to fall and cause
injury.
Do not climb on the outdoor unit
or place anything on it.
The falling of the outdoor unit
can be dangerous
Earthing: The unit must be
properly grounded. The cable
grounding must be connected
with the appropriate device in
the building.
Operating limits
Operating range:
Cooling mode: from -15°C to +43°C (outdoor temperature)
Heating mode: from -15°C to +24°C (outdoor temperature)
Interrompere
l'alimentazione
elettrica.
V 09/19
46
Description of components
Indoor unit
The display may vary from the graphic above. Please refer to the purchased product for the actual
display content and positions)
ingresso aria air inlet
pannellino panel
filtro filter
Tasto ausiliario auxiliary button
Deflettore orizzontale horizontal flap
uscitadell’aria air outlet
Spia alimentazione power indicator
Finestrella ricevitore receiver window
Spia temperatura temperature indicator
telecomando remote control
V 09/19
47
Outdoor unit
Unitàesterna Outdoor unit
ingresso aria air inlet
impugnatura handle
uscita aria air outlet
GUIDE TO THE REMOTE CONTROL AND DISPLAY
Remote control buttons
1. ON/OFF BUTTON
2. MODE BUTTON
3. FAN BUTTON
4. BUTTON ▲/▼
5. SWING BUTTON
6. SLEEP BUTTON
7. TEMP BUTTON
8. TURBO BUTTON
9. I FEEL BUTTON
10. TIMER BUTTON
11. WIFI BUTTON
12. LIGHT BUTTON
Unità esterna
ingresso aria
impugnatura
uscita aria
V 09/19
48
Getting to know the display icons
Getting to know the remote control buttons
N.B.:
● This is a general use remote controller, it can be used for the air conditioners with multifunction.
For some functions, which the model doesn't have, if you press the corresponding button on the
remote controller the unit will keep the original running status.
●Once connected to the power source, the air conditioner will make a sound. At this point the
operation indicator " " is ON (red indicator). You can now operate the air conditioner by using the
remote controller.
● Pressing the ON/OFF button on the remote controller, the signal icon " " on the display of remote
controller will blink once and the air conditioner will make a sound, this means that the signal has
been sent to the air conditioner. In the ignition state, the display shows the corresponding function
icons.
● Pressing once again the ON/OFF button to turn off the unit, the set temperature and the clock icon
will be displayed on the display of remote controller (If timer on, timer off and light functions are set,
the corresponding icons will be displayed on the display of remote controller at the same time);
1. On/Off button
Press this button to turn on or off the unit. The sleep function will deactivate when the unit is turned
off.
2. Mode
button
Each time you press this button, a mode is selected in a sequence that goes from: AUTO, COOL,
DRY, FAN, and HEAT *, as the following:
When you select automatic mode, the air conditioner will operate automatically according to the
factory settings. The set temperature cannot be adjusted and will not be displayed. Pressing the
"FAN" button will allow you to adjust the fan speed. Pressing the "SWING" button will allow you
to adjust the angle of airflow.
When you select cool mode, the air conditioner will run in cool mode. The indicator will
illuminate on the display. Press "▲" or "▼" to adjust the set temperature. Press the "FAN" button
to adjust the fan speed. Pressing the "SWING" button will allow you to adjust the angle of airflow.
Send signal
Turbo mode
8℃ heating function
Set temperature
Set time
TIMER ON /TIMER OFF
Child lock
Up & down swing
Set fan speed
Light function
Temp. display type
:Set temp.
:Outdoor ambient temp.
:Indoor ambient temp.
Sleep mode
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mode
I feel function
X-fan mode
health function
ventilation operation
NOTICE:
“ ” This is a general remote controller. Some models have this function while some
do not. Please refer to the actual models.
V 09/19
49
When you select dry mode, the air conditioner will run at low speed in dry mode. The indicator
will illuminate on the display. The fan speed cannot be adjusted in this mode. Pressing the
"SWING" button will allow you to adjust the angle of airflow.
When you select fan mode, the air conditioner will operate only the fan, blowing air without cooling
or heating. All the indicators will switch off. Press the "FAN" button to adjust the fan speed.
Pressing the "SWING" button will allow you to adjust the angle of airflow.
When you select heat mode, the air conditioner will run in heat mode. The indicator will
illuminate on the display. Press "▲" or "▼" to adjust the set temperature. Press the "FAN" button
to adjust the fan speed. Pressing the "SWING" button will allow you to adjust the angle of airflow.
N.B.:
To prevent blasts of cold air from being blown into the room, there will be a delay of 1 – 5 minutes
after selecting heat mode before operation begins. (The actual delay will depend on the indoor
ambient temperature).
The temperature can be set between 16 – 30°C and four fan speeds are available: automatic,
low, medium and high.
3. FAN button
Pressing this button will allow you to cycle through and set the fan speed: automatic (AUTO),
low ( ), medium ( ) or high ( ). When turning on the unit, the AUTO ventilation
speed is activated automatically. With automatic speed, the unit automatically selects the fan
speed best suited according to the factory settings. In DRY mode (dehumidification), only the
low ventilation speed can be set.
Note:
The fan speed in dehumidification mode is low.
Pressing the ventilation speed button in Cooling or Dehumidification mode for 2 seconds
activates the X-FAN function and the icon appears on the remote control: the unit will continue
to ventilate for a few minutes, even after the unit is turned off, to dry the battery of the indoor unit,
thus avoiding the formation of mold. This function is not available in Auto, Ventilation or Heating
mode.
If the X-FAN function has been selected: after turning the unit off with the ON / OFF button, the
fan of the indoor unit will continue to run for a few minutes at low speed. During this time press
the FAN button for 2 seconds to stop the fan.
If the X-FAN function is not selected, when the air conditioner is turned off by pressing the ON /
OFF key, the fan switches off together with the unit.
4. ▲/ ▼ button
Press "▲" or "▼" once to increase or decrease the set temperature by 1°C. (The temperature
cannot be adjusted in automatic mode).
When setting the TIMER ON, TIMER OFF, press "▲" or "▼" to adjust the time.
5. SWING button – vertical oscillation
Press this button to set the swing angle (up/down). You can cycle through and set the fan's angle
of airflow as shown below:
nessuna visualizzazione (il deflettore orizzontale si arresta nella
posizione corrente)
no display (the horizontal flap stops in the current position)
nessuna
visualizzazione
(il deflettore orizzontale si arresta
nella posizione corrente)
V 09/19
50
6. SLEEP button
In cool, heat or dry mode, press this button to start the SLEEP function. The icon will appear
on the remote control display. Press the button again to exit the SLEEP function. The icon
will disappear from the display.
The temperature will increase or decrease by 2 degrees over two hours according to the function
selected (cool/heat).
7. TEMP button
Pressing this button will allow you to display the set temperature, the indoor ambient temperature,
or the outdoor ambient temperature on the indoor unit's display. You can cycle through the
settings on the remote control display as shown below:
Nessuna visualizzazione no display
• When you select or “no display” with the remote control, the set temperature will appear
on the indoor unit's display.
• When you select with the remote control, the indoor ambient temperature will appear on
the indoor unit's display.
• When you select with the remote control, the outdoor ambient temperature will appear
on the indoor unit's display.
N.B.:
•
It is not possible to display the outdoor ambient temperature on all models. The indoor unit
will receive the signal but will display the set temperature.
•
The set temperature will appear on the unit's display on start-up, if enabled to do so.
• When you select to display the indoor or outdoor ambient temperature, the indoor unit will
display the corresponding temperature for three to five seconds, after which it will
automatically revert to displaying the set temperature.
8. TURBO button
In cool/heat mode, press this button to switch to rapid cool/heat mode. The icon will appear
on the remote-control display. Press this button again to exit the TURBO function. The icon
will disappear from the display.
9. I FEEL button
Press this button to start the I FEEL function. The icon will appear on the remote control
display. When you select this function, the remote control will send the detected ambient
temperature to the indoor unit, which will then adjust its operation automatically based on the
difference between the detected temperature and the set temperature.
Press the button again to exit the I FEEL function. The icon will disappear from the display.
The remote control should be positioned near the user when this function is selected. The
remote control should not be placed anywhere high or low temperatures may occur to
avoid inaccurate ambient temperature detection.
10. TIMER ON/OFF button
On a working unit, press this button to set the unit's power off time. When the unit is off, press
this button to set the unit's power-up time. By pressing this button, the HOUR ON or HOUR OFF
indicator starts blinking: if you press "▲" or "▼" buttons you can set the time (from 0.5 to 24) to
switch the unit off or on. Hold down the button "▲" or "▼" for 2 seconds to quickly change the
time until the desired time is reached. Press the TIMER button to confirm the TIMER settings
and the HOUR ON or HOUR OFF indication will stop blinking.
If the “HOUR” message flashes but does not follow any setting, it will stop flashing after 5
seconds. If the TIMER ON or OFF function is activated, press the TIMER button to cancel the
setting.
nessuna
visualizzazione
V 09/19
77
Have the dust and other particles produced during
installation been removed?
Risk of malfunction or damage to components.
Are the gas valve and liquid valve of the connecting tube
fully open?
The cooling (heating) capacity may be insufficient.
The entrance and exit of the pipe holes have been
covered?
Risk of condensation and dripping water.
TESTING AND OPERATION
Functional testing
Connect the power and press the ON/OFF button on the remote control to start operation.
Press the MODE button to select AUTO, COOL, DRY, FAN and HEAT mode and check the air
conditioner operates normally.
If the ambient temperature is below 16°C, the air conditioner will be unable to start cooling.
APPENDICES
Piping configuration
1. Standard connecting tube length:5, 7.5, 8 m.
2. Minimum connecting tube length: 3 m.
3. Maximum connecting tube length and maximum height difference:
Capacity
Maximum
connecting tube
length
Maximum
height
difference
9000 Btu/h 15 10
12000 Btu/h 20 10
18000Btu/h 25 10
24000Btu/h 25 10
Warning! Note the additional charge on the data plate affixed to the outdoor unit.
Additional oil and refrigerant charging
If the length of the connecting pipe is increased by 10 m compared to the standard length,
add 5 ml of refrigeration oil for every 5 m of pipe added.
Method for calculating the amount of additional refrigerant charge (liquid pipe): amount of
additional refrigerant charge = additional length of liquid pipe x additional amount of
refrigerant charge per metre.
Connecting pipe diameter Additional refrigerant
Liquid pipe (mm) Gas pipe (mm) (g/m)
6,35 9,52
20 (9-12K) 16 (18K)
6,35 15,88
40
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo ECOLIGHT SINGLE SPLIT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo ECOLIGHT SINGLE SPLIT in the language / languages: English as an attachment in your email.

The manual is 5,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo ECOLIGHT SINGLE SPLIT

Argo ECOLIGHT SINGLE SPLIT User Manual - German - 47 pages

Argo ECOLIGHT SINGLE SPLIT User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info