805014
9
Zoom out
Zoom in
Previous page
1/18
Next page
28V 04/23
Press the Mode button again to deactivate this function.
Laundry mode: Press the Mode button to activate the Laundry mode, the icon lights up on the control
panel. The unit operates continuously regardless of the humidity level, therefore it is not possible to adjust the
% humidity. Instead, it is possible to adjust the ventilation speed using the FAN button.
3. HUMIDITY BUTTON (HUM)
Press this button to view the % humidity in the room. Press this button again to adjust the desired humidity from
30% to 80% in 5% steps.
After making the adjustment, the set % will ash on the display for 3 seconds, thus conrming the successful setting,
the display will then go back to showing the % humidity in the room.
By holding this button down for 3 seconds, the humidity level in the room is shown on the display.
This button can be used also to set the Timer.
4. TIMER/WIFI BUTTON
Timer Function
Press this button to program switching on (if the unit is off) or switching off (if the unit is on) from 0 to 24 hours.
Press the HUM button to set the desired time, each time it is pressed the adjustment interval corresponds to 1 hour,
and it is possible to view the set time on the display. The LED on the control panel stays on during the set time
interval. To deactivate the Timer, “00” must appear on the display (it ashes 4 times), and the Timer symbol on
the control panel will switch off.
Wi Function
Press and hold this button to start network setup or disconnect WIFI. When the Wi LED ashes on the control
panel it is possible to connect the Wi. If no connection is made within 3 minutes, the LED will stop ashing, and
connection will not be possible. Press and hold this key again to connect Wi.
5. FAN BUTTON
Press this button to adjust the fan speed in the following circular sequence: High - Low:
The corresponding LEDs light up on the control panel according to the selection made.
The fan speed can be adjusted in Laundry and Sleep modes, while when automatic defrosting is in operation it’s
not possible to adjust it.
6. CHILD LOCK BUTTON
Press this button for 3 seconds to activate the control panel lock function, the LED on the control panel lights
up, and it is no longer possible to make selections on the control panel. Press this button again for 3 seconds to
deactivate this function, the LED goes out.
When the appliance is switched off, the child lock function is automatically deactivated.
MEMORY FUNCTION
The dehumidier keeps the last settings selected before switching off or black out.
COLORED LED STRIP
On the side part of the dehumidier there is a LED strip which colors differently according to the level of humidity
detected in the environment:
Blue = Ambient humidity lower than 45%
Green = Ambient humidity between 45% and 65%
Red = Ambient humidity higher than 65%
If the following error codes E0, E1, CL, CH, LO, HI appear on the display on the control panel, the side LED strip
will be red (for error codes, refer to the troubleshooting section).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo DRY PURY EVO WF 17-21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo DRY PURY EVO WF 17-21 in the language / languages: English as an attachment in your email.

The manual is 1.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo DRY PURY EVO WF 17-21

Argo DRY PURY EVO WF 17-21 User Manual - German - 19 pages

Argo DRY PURY EVO WF 17-21 User Manual - French - 19 pages

Argo DRY PURY EVO WF 17-21 User Manual - Italian - 19 pages

Argo DRY PURY EVO WF 17-21 User Manual - Portuguese - 19 pages

Argo DRY PURY EVO WF 17-21 User Manual - Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info