805017
28
Zoom out
Zoom in
Previous page
1/106
Next page
28V 04/23
CARE AND MAINTENANCE
Cleaning the external surface
Warning: Always remove the plug from the socket before cleaning the dehumidier, otherwise electric shock or
malfunction may occur.
Warning: Do not wet or immerse the dehumidier in water otherwise electric shock may occur.
Use a soft, damp cloth to clean the outside of the dehumidier.
Do not use solvents, petrol, xylene, talcum powder and brushes: they could damage the surface or the color of the
case.
Cleaning the water tank
It is advisable to remove the tank every two weeks to prevent the formation of mold and bacteria. Fill the water tank
with clean water and a small amount of detergent, empty and rinse it.
Double ltration system maintenance
The product is equipped with a double ltration system: anti-dust lter + active carbon lter.
Cleaning the dust lter located on the air inlet
The dust lter has an important function in retaining the main allergens.
Cleaning the dust lter should be done every two weeks of operation.
The function of the lter is to lter the dust or dirt present in the air, therefore if the lter is blocked by dust the electricity
consumption will be higher than normal.
1. Remove the lter by releasing it from its seat, following the direction of the arrow (Fig.1).
2. Gently clean the lter with a vacuum cleaner to remove dust. If necessary, wash the lter with warm soapy water
DO NOT USE ALCOHOL, BENZENE OR OTHER AGGRESSIVE PRODUCTS (Fig.2).
Leave the lter to dry naturally, then insert it back into its housing (Fig.3).
Do not use hair dryer or re to dry the lter.
Do not use sponges or brushes to clean the lter as they can damage it.
3. Replace the lter and resume normal operation of the appliance.
Do not use the dehumidier without the lter, because the dust could affect the efciency of the evaporator and cause
higher energy consumption.
Fig.1 Fig.2 Fig.3
Maintenance of the additional activated carbon lter
The activated carbon lter is particularly effective in eliminating bad odours.
However, proper maintenance is required.
The lter should be replaced after approximately 600 hours of operation.
Spare parts are available at authorized technical assistance centres.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo DRY PURY EVO 11-13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo DRY PURY EVO 11-13 in the language / languages: Spanish as an attachment in your email.

The manual is 46.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo DRY PURY EVO 11-13

Argo DRY PURY EVO 11-13 User Manual - English - 17 pages

Argo DRY PURY EVO 11-13 User Manual - German - 18 pages

Argo DRY PURY EVO 11-13 User Manual - French - 18 pages

Argo DRY PURY EVO 11-13 User Manual - Italian - 18 pages

Argo DRY PURY EVO 11-13 User Manual - Portuguese - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info