724566
8
Zoom out
Zoom in
Previous page
1/16
Next page
8
- Insert in the two holes the obtained plastic tubes.
- Fix the two anti-intrusion grilles and the two external
grilles with the blades toward the bottom using wall rawl
plugs and screws.
- In case it is not possible to fix the two external grilles
directly at the wall, hook the two grilles to the internal
ones (3) using the supplied tension bars, as follows:
a) Bend them, fix the hook of the spring, insert them
inside the tube and open them toward the outside.
b) Choose the proper hook of the tension bar in order
to lengthen the spring of 15-20 mm and hook it to
the internal grille.
c) Eliminate the exceeding part of the tension bar cutting
it near the hooking points.
- Apply the supplied gaskets (9) around the holes on the
back side of the unit.
Spring
hook
- In case of very thin walls (less than 10 cm) it is necessary
to mount the internal anti-intrusion grilles on the back
of the unit applying the gaskets (9) around the grilles.
Unscrew the screws on the back of the unit and fix the
grilles using the same screws.
The tube and the external grilles will not be used.
CAUTION
The manufacturer assumes no
responsibilities if this safety
instruction is not observed.
INSIDE OUTSIDE
EN
9
93
3
3
9
3742551750-I-AR-DD.indd 8 11/09/2019 13:41:36
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo DD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo DD in the language / languages: English as an attachment in your email.

The manual is 1.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo DD

Argo DD User Manual - English - 15 pages

Argo DD Installation Guide - German - 16 pages

Argo DD User Manual - German - 16 pages

Argo DD Installation Guide - French - 16 pages

Argo DD User Manual - French - 16 pages

Argo DD User Manual - Italian - 16 pages

Argo DD Installation Guide - Italian - 16 pages

Argo DD User Manual - Portuguese - 16 pages

Argo DD Installation Guide - Portuguese - 16 pages

Argo DD User Manual - Spanish - 16 pages

Argo DD Installation Guide - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info