805102
9
Zoom out
Zoom in
Previous page
1/12
Next page
21
V 04/22
TEMPERATURE REGULATION
The temperature can only be set via the remote control. Press the + or buttons to regulate the desired temperature (from
10°C to 49°C). If you set the temperature to 25°C the “°C” LED comes on as shown in the figure:
Press to cancel the temperature setting.
ECO SMART FUNCTION
The fan heater operates at maximum power (COMFORT mode) when the set temperature is at least 4°C higher than the
room temperature; if the set temperature is 0-2°C higher than the room temperature, the fan heater operates at medium power
(ECO mode), if the room temperature is higher than the set temperature the fan heater switches off and starts operating again
when the room temperature drops 2°C below the set temperature.
ON/OFF DAILY TIMER SETTING
In stand-by mode, press the button to set the switch-on timer. The switch-on timer can be set from 1 to 12 hours, by
pressing on the same button to move on in intervals of 1 h: the default set temperature when it switches on is 23°C.
When the appliance is operating, to set the switch-off timer press the button; the switch-off button can be set from 1 to 12
hours, by pressing on the same button to move on in intervals of 1 h.
TIME SETTING (Only from the remote control)
Press the SET button to show the time on the display; press the + or buttons to set the current hour (00-24); press the SET
button again to set the minutes (00-59); press the SET button again to set the day of the week if you press + or the display
will show the following abbreviations: d1, d2, d3,… which correspond respectively to Monday, Tuesday, Wednesday etc.;
once you have selected the current day press OK to confirm.
SETTING THE WEEKLY TIMER (only via the remote control)
The unit must be turned on for programming.
After having set the time and day of the week, press P to enter the weekly timer setting,
1. Press DAY to set the switch-on day (d1, d2, d3,...),
2. Press EDIT to set the operating periods for the fan heater (P1, P2,… P6)
3. Press TIME/ON to set the switch-on time (00-23)
4. Press TIME/OFF to set the switch-off time (00-23)
5. Press the + or buttons to set the desired temperature
6. Press OK to confirm the settings
To set any other subsequent operating times, (max 6) repeat the procedure from point 2 to point 6.
Repeat the procedure from point 1 to set the other days of the week.
After completing the weekly timer setting, press the buttons DAY EDIT TIME/ON and TIME/OFF to check the settings for each
day.
All settings are deleted when the fan heater is switched off using this switch
“OPEN WINDOW” FUNCTION SETTING
When the appliance is operating, press the button on the remote control to activate the open window
function; the LED appears on the display, as shown in the figure: Press the + or buttons
to set the temperature. When this function is active, if the room temperature drops by 5-10°C in less than 10 minutes, the fan
heater stops operating and switches to stand-by mode. Press to restart the appliance.
If both the weekly timer and open window functions are set and, according to the weekly programme, the appliance is off, the
window open function will also be inactive. Conversely, when the appliance is operating in line with the weekly programme,
the window open function can control the ON/OFF operation of the appliance.
OVERHEATING SAFETY DEVICE
In the event of overheating, the protection system of the appliance will automatically disable the heating elements and
the motor, thus causing the fan heater to stop working.
In this case:
turn the fan heater off;
remove the causes of the overheating (e.g. obstacles in front of the air input/output grilles, dust build-up inside the
appliance, etc.);
leave the appliance to cool down for 15-20 minutes;
Contact an Authorised Service Centre.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Chic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Chic in the language / languages: English as an attachment in your email.

The manual is 1.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Chic

Argo Chic User Manual - German - 13 pages

Argo Chic User Manual - French - 12 pages

Argo Chic User Manual - Italian - 12 pages

Argo Chic User Manual - Portuguese - 12 pages

Argo Chic User Manual - Spanish - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info