665610
7
Zoom out
Zoom in
Previous page
1/10
Next page
V 09/16
18
1. Unscrew the two screws on top of the 2
vertical bars of the wall bracket.
2. Pull down the wall bracket by pressing downward on the
top of the two vertical bars of the wall bracket.
3. Remove the bracket for wall mounting from the convector completely.
4. By supporting the bracket onto the wall, mark on the
wall with a pencil the points where it is necessary to
make the holes in order to insert the Fishers. Observe
the minimum distances from the walls as pointed out
in the picture below.
5. Drill holes in the wall and insert the 4 Fishers.
Secure the bracket to the wall and insert the 4
screws supplied.
6. Place the unit upright. Insert the two lower parts of the
bracket into the holes on the rear of the convector in the
lower part.
7. Insert the two upper parts of the bracket into the
holes on the rear of the convector in the upper
part.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Blues at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Blues in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Blues

Argo Blues User Manual - German - 10 pages

Argo Blues User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info