Manual Argo ASICS10DC (page 56 of 84) (English, German, French, Italian, Portuguese, Spanish)

665475

Zoom out

Zoom in

1/84

OUTDOOR/INDOOR UNIT REFRIGERANT CIRCUIT ADDRESS

Indoor units that are part of a multisplit system must be properly configured to be able to communicate with the

outdoor unit over different channels (Indoor A, Indoor B, etc...) of the communication bus.

Each indoor unit address must correspond to the physical connection of the indoor unit to the outdoor unit refrigerant circuit,

i.e.:

Refrigerant Circuit A <--> Indoor Unit Address A

Refrigerant Circuit B <--> Indoor Unit Address B

...

There are three methods to set the address of an indoor unit:

(1) Dip-switch setting: the address is set by mean of a dip-switch located on the indoor unit pcb.

(2) Remote controller procedure (still available): the address is set by mean of a special setting on the remote controller.

(3) Automatic addressing procedure: the address is automatically set on every indoor unit of the system by mean of an

automatic procedure.

Check that the setting of switch SW2 (PCB) corresponds to the figure:

SW2 (PCB factory state)

1=off

2=off

INDOOR UNIT A

INDOOR UNIT D

SW2

1=on

2=on

PCB

INDOOR UNIT B

SW2

1=on

2=off

PCB

INDOOR UNIT C

SW2

1=off

2=on

PCB

(1) ADDRESS SETTING THROUGH DIP-SWITCHES (UP TO 4 INDOOR UNITS)

Disconnect the power

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Argo ASICS10DC in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo ASICS10DC

Argo ASICS10DC User Manual - English - 16 pages

Argo ASICS10DC User Manual - German - 16 pages

Argo ASICS10DC User Manual - French - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Argo ASICS10DC Manual

Product: