805023
16
Zoom out
Zoom in
Previous page
1/22
Next page
V 11/21 38
X-FAN BUTTON (only on remote control)
In cooling and dehumidification mode it is possible to activate the X-FAN function.
After pressing the X-FAN button on the remote control, with the unit off, the unit's internal fan continues to operate for a
short time at minimum speed, to allow any residual water in the air pipe to dry. If you want to stop this function, press the
X-FAN button on the remote control again
TEMPERATURE AND ERROR DISPLAY
Problem Cause Solution
H8 Tank full of water. Empty the tank.
If the problem persists, contact a service centre.
F1 Room temperature sensor failure. Contact a service centre.
F2 Failure of temperature sensor on the
evaporator.
Contact a service centre.
F0 Refrigerant leakage. Air conditioner
out of order.
Contact a service centre.
H3 Overload protection device on
compressor.
The room temperature exceeds the appliance's operating
range (beyond 35°) or there is too much humidity. Wait for
the temperature to drop below 35 °C.
Check if the evaporator and compressor are obstructed by
objects. If they are, remove the objects, disconnect the unit
then restore the power supply.
Clear the obstructed ventilation grilles.
If the problem persists, contact a service centre.
E8 Overload protection.
F4 The external temperature sensor has
short-circuited.
Contact the service centre.
The temperature and error display lights up only in the COOL mode. In the DRY and FAN modes the display does not light
up.
SAFETY FUNCTIONS
REMOTE CONTROL LOCK
Simultaneously press "+" and "-" to lock the remote control.
The "Lock" icon will light up on the remote control, and the latter will not respond to commands.
SWITCHING BETWEEN °C AND °F.
Press the "-" and "MODE" buttons simultaneously to switch between °C and °F.
LIGHT FUNCTION
Press the “+” and “FAN” buttons simultaneously for 3 seconds to set the activation/ deactivation of the lamp.
CARE AND MAINTENANCE
WARNING!
Prior to carrying out any cleaning or maintenance, unplug the unit from the power socket.
1. Cleaning the air filters
The air filter must be checked at least once every
two weeks of operation. Operating with dirty or
clogged filters will decrease the effectiveness of the
air conditioner and can cause serious problems.
To remove the filter, release the rear grille (1) then
slide out the filter by gently pulling it sideways (2).
Use a vacuum cleaner to remove any dust. Should
this not be sufficient, wash the filter with lukewarm
water and neutral detergent (if necessary), rinse it
with cold water then leave it to dry naturally before
putting it back in place. After putting the filter back
in place, close the grille and resume use of the air
conditioner.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo Altea at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo Altea in the language / languages: English as an attachment in your email.

The manual is 1.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo Altea

Argo Altea User Manual - German - 23 pages

Argo Altea User Manual - Italian - 22 pages

Argo Altea User Manual - Spanish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info