Manual Argo AF - AFIAS11DC v2 (page 39 of 72) (English, German, French, Italian, Portuguese, Spanish)

665469

Zoom out

Zoom in

1/72

DEFAULT SETTING RESET - RESET IMPOSTAZIONI DI DEFAULT - REMISE A ZERO DES

REGLAGES DE DEFAUT - ZURÜCKSETZEN AUF STANDARDEINSTELLUNGEN - RESTABLECER

LA CONFIGURACIÓN PREDETERMINADA - RESTABLECIMENTO DAS CONFIGURAÇÕES DE

FABRICA -

∂·Ó·ÊÔÚ¿ ÛÙ¿ÓÙ·ÚÙ Ú˘ıÌ›ÛÂˆÓ

To operate the unit again with the default setting it is necessary to set the remote control as follows:

Filter: ON

Night Mode / High Power Mode: OFF

Operation mode: AUTO

Flap: AUTO

Set-point: 10°C

At this point, press contemporary the FAN and IFEEL keys of the remote control for more than 5

seconds and release them by pointing the remote control towards the indoor unit.

If the setting is correct you will hear an acoustic signal as confirmation (4 beep).

After the acoustic signal it is necessary to switch OFF and ON the air conditioner to enable the real

reset of the setting. Now the unit starts again operating with the factory setting.

Per riportare l’unità interna a funzionare con le impostazioni di default bisogna impostare il telecomando

come segue:

Filter: ON

Night Mode / High Power Mode: OFF

Modo di funzionamento: AUTO

Flap: AUTO

Temperatura impostata: 10°C

A questo punto, tenere premuto contemporaneamente i tasti FAN e IFEEL del telecomando per più

di 5 secondi e rilasciarli puntando il telecomando verso l’unità interna.

Se le impostazioni sono corrette l’unità interna emette un segnale acustico come conferma (4 beep).

Dopo il segnale acustico è necessario spegnere e riaccendere il climatizzatore per abilitare il ripristino

effettivo delle impostazioni iniziali. Al riavvio l’unità interna ricomincia a funzionare con le impostazioni

di fabbrica.

Pour remettre à zéro les réglages de défaut, vous devez régler la télécommande comme il suit:

Filter: ON

Night Mode / High Power Mode: OFF

Mode de fonctionnement: AUTO

Flap: AUTO

Température réglée: 10°C

Maintenant appuyer en même temps sur les boutons “FAN” et “I FEEL” pendant plus de 5 secondes

et les relâcher en dirigent la télécommande vers l’unité intérieure.

Si les réglages sont corrects il y aura un signal acoustique pour confirmation (4 beep). Après le

signal acoustique, il est nécessaire éteindre et allumer de nouveau le climatiseur pour activer

effectivement la mise à zéro des réglages de défaut. Lorsque vous allumez l’unité intérieure, elle

commencera à fonctionner avec les réglage d’usine.

Um die Inneneinheit mit den Standardeinstellungen zurückzusetzen, mussen Sie die Fernbedienung,

wie folgt, einstellen:

Filter: ON

Night Mode / High Power Mode: OFF

Betriebsweise: AUTO

Flap: AUTO

Eingegebene Temperatur: 10°C

Jetzt, drucken Sie gleichzeitig die Taste “FAN” und “I FEEL” der Fernbedienung während mehr als

5 Sekunden und lassen Sie sie, indem Sie die Fernbedienung auf der Inneneinheit richten.

Wenn die Einstellungen sind korrekt, werden Sie ein Bestätigungssignal anhören (4 beep). Nach dem

Bestätigungssignal mussen Sie das Klimagerät auf-und wieder einschalten, um das tatsächlichen

Zurücksetzen auf Standardeinstellungen zu aktivieren. Wenn Sie schalten die Inneneinheit ein,

beginnt sie mit der Standardeinstellung zu arbeiten.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Argo AF - AFIAS11DC v2 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo AF - AFIAS11DC v2

Argo AF - AFIAS11DC v2 User Manual - English, German, French, Italian, Portuguese, Spanish - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Argo AF - AFIAS11DC v2 Manual

Product: