Manual Argo A9 - AWIBS9DC (page 9 of 100) (English, German, French, Italian, Portuguese, Spanish)

665468

Zoom out

Zoom in

1/100

ADJUSTING THE AIR FLOW DIRECTION

HORIZONTAL (manual)

The horizontal air flow can be adjusted by moving the

vertical vanes to the left or right, as indicated in the following

figures.

Left

Vertical vane

Right

VERTICAL (with remote control unit)

Make sure that the remote control unit has been turned on.

Press

the FLAP button to select the flap function

Fixed:

six

position

Continous

oscillations

Automatical

oscillations

Do not move the flap with your hands when the air

conditioner is running.

CAUTION

NOTES

The flap automatically closes when the unit

is off.

When the unit starts in heating operation,

the fan stops and the flap is in the 4 position

(if automatical oscillation is selected) until

the air being blown out of the unit begins to

warm. Once the air warms up, the flap

position and fan speed change to the settings

specified with the remote control.

• Use the FLAP button on the remote control to adjust

the position of the flap. If you move the flap by hand,

the factual flap position and the flap position on the

remote control may no longer match. If this should

happen, shut off the unit, wait for the flap to close,

and then turn on the unit again; the flap position will

now be normal again.

• Do not have the flap pointed down during cooling

operation. Condensation may begin to form around the

air vent and drip down.

CAUTION

Down

Flap

Air outlet

grille

HOW TO ADJUST THE FLAP DIRECTION

Zone «A»

for cooling and dehumidifyng

Zone «B»

for heating

Set vertical vanes to the front position during

COOLING/DRY operation if humidity is high.

If the vertical vanes are set to the left-most or right-most

position, condensation will form around the air outlet

and drip off.

CAUTION

3742540532-U-AWIAS7-BS9DC 20-07-2015 8:49 Pagina 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Argo A9 - AWIBS9DC in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Argo A9 - AWIBS9DC Manual

Product: