713258
21
Zoom out
Zoom in
Previous page
1/24
Next page
21English
4 Inial start-up
Please remove the kele and the baseplate from the packing and clean the unit
with a damp cloth. Aerwards connect the kele only to a properly installed
grounded socket. Before regular use, ll the water reservoir with cold water to its
maximum level and boil according the following instrucons. Thereaer discard
the water in order to remove any residues of the producon process.
5 Handling
Open the lid by holding the lever and turning it counter clockwise (OPEN). Fill the
kele with cold water and place the lid back on the fastening. Turn the lid clockwise
(LOCK) unl the kele is locked securely. To pour out water you have to press the
lever down. The water kele is not fully waterght. Please keep this in mind when
transporng it. Make sure it is in an upright posion when you are transporng it.
Note: Inside the kele there is a mark for the maximum lling, which can be seen
when the lid is removed. Please do not ll it with more water than recommended
because hot water can spill out. Place the kele on the base plate and push the on
/ o switch. The switch has two separate pressure points you can use to turn it on
or o. Aer acvang the switch the kele will boil the water. It will automacally
turn itself o when the water has reached the target temperature.
6 Decaling and cleaning
We recommend decalcifying the kele in regular intervals, depending on the in-
tensity of use. Before cleaning, it is essenal to remove the power plug from the
socket and wait unl the device is completely cooled down. The scale lter is locat-
ed prior to the spout. To remove the lter, open the cover and push the plasc ap
downwards. Then deep clean the taken lter with warm water and insert it into
the holder again. When inserng the lter, take care that the retaining lug is xed
to the guide rail. Only use convenonal decaling agents based on citric acid. Please
follow the manufacturer´s instrucons for dosing the respecve product you have
chosen. The heang element must not be cleaned and never be processed with
sharp or hard objects. For cleaning the outer surface of the kele, only use a damp
cloth. Never use hard or abrasive objects like a wire brush or a steel-sponge for
cleaning. Please do not use any aggressive cleaning agents which could be harmful
for human consumpon or damage the surface.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arendo 302803 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arendo 302803 in the language / languages: English, German as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info