773594
9
Zoom out
Zoom in
Previous page
1/86
Next page
5
en
4.4.2 Visual inspection before each use
Every time you use the breastpump, check that …
… the USB cable and the power adapter are undamaged.
… the pumpset is clean, correctly assembled and intact.
… the pumpset is correctly connected.
4.5 Operation and procedure for expressing
Warning: Risk due to contamination / infection
To prevent contamination of your breast milk, thoroughly wash your hands with soap and water before each use.
4.5.1 Basic functions – step-by-step procedure
1Find a comfortable position for expressing, hold the pumpset on the breast shell and centre the nipple.
2Gently tap the On/Off button to start expressing.
3The breastpump is in stimulation mode.
This can be seen by the upper segment of the mode button that lights up orange.
4Adjust the vacuum (suction level) and the cycle (suction frequency) to what is comfortable for you.
The vacuum and the cycle can be increased using the button or decreased using the button. By holding the
particular button down, the intensity of the vacuum or cycle is changed by one step or one bar.
5After two minutes, the stimulation mode switches automatically to the expression mode .
a) If the breast milk starts to flow earlier, slowly tap the mode button to manually switch to the expression
mode.
b) If the let-down reflex could not be triggered after the preset two minutes, tap the mode button to extend the
stimulation phase by another two minutes.
6The breastpump is in expression mode.
This can be seen by the lower segment of the mode button that lights up green.
7Adjust the vacuum (suction level) and the cycle (suction frequency) to what is comfortable for you.
The vacuum and the cycle can be increased using the button or decreased using the button. By slowly
tapping the corresponding button, the intensity of the vacuum or cycle is changed by one step or one bar.
Expressing is most successful if you select the vacuum and cycle settings that are comfortable for you.
8The timer starts automatically when the Ardo Alyssa is switched on and continuously displays
the expressing time.
9Massage the breast while expressing. This increases the volume of milk expressed.
10 By holding down the On/Off button you can switch off the breastpump.
4.5.2 Silent Start
If the Ardo Alyssa is switched on and is not connected to a pumpset, it runs very quietly but does not pump. This silent start
enables you to connect to the MyArdo app without the Ardo Alyssa being active.
When the pumpset is inserted, you can start to express (see Section 4.5).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ardo Alyssa Double at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ardo Alyssa Double in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info