495971
6
Zoom out
Zoom in
Previous page
1/28
Next page
PROGRAMMER KNOB “STOP”:
The stop function resets the washing machine. If, for any reason, you want to change the wash
programme or add more washing to the load during the wash cycle, simply place the
programmer knob in position “STOP” (the button will start to flash). Then re-position the
knob on the new programme and press the “START” button. At this point, before the
programme restarts, any water in the machine will be drained
N.B. after having caried out this operation, check for the presence of detergent in the
appropriate dispensers and add more if necessary.
Warning!! only use this function if strictly necessary and then only if the programme to reset has
been running for a few minutes. Before opening the door after a reset, wait 2 minutes for the locking
mechanism to release.
STOP
SM1029
EXTRA RINSE:
The washing machine has been designed to reduce water consumption to a
minimum. In very soft water areas, or in the case where detergent residues are
noticed at the end of the wash cycle, pressing this button will add one more rinse
to the programme.
GB
USING THE WASHING MACHINE
OPTIONAL FUNCTIONS
PREWASH:
Press this button and the machine will perform a prewash at the maximum temperature of
40°C.
This function can only be used on the “COTTON” and “SYNTHETICS” programmes.
N.B. When this option is used, the detergent must also be added to the appropriate prewash
compartment..
MONITORING THE WASH:
The figure alongside shows the 5 main functions of a PREWASH, WASH, RINSE,
SPIN, END wash cycle:
Each of these functions will be highlighted during the wash by a led.
In this way, the user is constantly aware of the progress of the wash.
After the spin phase, the corresponding led will stay lit for approximately 2 minutes.
This is the time lapse necessary for the door release mechanism to work, after which
the END led will light up.
At this point, press the On/Off button, open the door and remove the washing.
START BUTTON:
After selecting the required programme, press this button to start the wash cycle Button
(L) will light up to indicate the wash cycle has started.
L
NB. The use of this function depends on the type of programme selected. Consequently, if the
wash programme does not include this function, the button cannot be enabled (see PROGRAMME
TABLE”).
6
PREWASH
WASH
RINSE
SPIN
END
ON/OFF
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ardo AE1033 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ardo AE1033 in the language / languages: English, Italian, Polish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info