801840

Ardes AR5M40 Manual

22
Zoom out
Zoom in
Previous page
1/28
Next page
22
The total operating time set before the automatic switching o󰀨 is given
by the light indicators (for example if all the timer light indicators are on
during the operating time set before the automatic switching o󰀨, the total
operating time is given by:
1/2Hrs.(0,5 hours)+1Hrs.(1 hour)+2Hrs.(2 hours)+4Hrs. (4 hours)=7,5
hours).
The timer light indicators are turned o󰀨/ on according to the operating
time remained.
To disable the timer function press the button until all the operating light
indicators are o󰀨, or turn o󰀨 the fan manually by pressing the O󰀨 button.
SWING
(button present both on the panel and on the remote control): press this
button to enable the automatic oscillation from right to left. The relative
light indicator is turned on, on the display. To disable the automatic
oscillation, press again the button (the related light indicator is turned o󰀨
on the display).
MIST
(button present both on the panel and on the remote control): press this
button to enable the misting. Attention: before enabling this function
make sure there is water in the tank; in case you need to add water
please see the paragraph “HOW TO FILL UP THE TANK” Once the tank
is replaced on the main body of the humidier, set the switch placed on
the side of the humidier’s main body in position “I”. The light indicator
placed on the control panel of the humidier (23) turns green. You can
adjust the intensity of the misting by rotating the adjustment knob placed
on the control panel of the humidier (23): if you rotate it clockwise the
intensity increases; if you rotate it counterclockwise the misting intensity
decreases.
The misting comes out of the knob in a few seconds after pressing the
button.
When the water is out, the misting function is disabled and the light
indicator of the adjustment knob turns red; we recommend you to disable
the misting function when the humidier is o󰀨 or the tank is empty.
When the function is enabled the related light indicator is turned on, on
the display, and when the function is disabled the light indicator is turned
o󰀨 on the display. The misting function can be enabled independently
from the ventilation; it is enough to turn o󰀨 the fan by pressing the O󰀨
button and then to press the Mist button.
VERTICAL SLOPE:
You can vertically point the front of the fan choosing the desired angle. It
is su󰀩cient loosen the screw (1) under the motor, move the front of the
fan up or down according to the desired slope (2) and tight the screw.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ardes AR5M40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ardes AR5M40 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info