801839
21
Zoom out
Zoom in
Previous page
1/100
Next page
21
Unscrew the screws (24) from the supporting tubes (15). Place the
supporting tubes (15) into the holes of the base (16) making sure that
the holes on the bottom of the support tubes and the holes in the tube
housings on the base are coincident. Ensure the supporting tubes (15)
on the base (16) by using the 4 screws (24) previously unscrewed.
Place the weight of the base (17) under the base (16). NB: the weight
of the base has a at face and a curved face; the at side must placed
against the base. Fix the weight of the base (17) using the 4 screws
supplied (25).
Loosen the screws (13), insert the main body (12) on the support tubes
(15) and x it by tightening the xing screws (13).
Place the humidier main body (20) in its housing on the base (16).
Fix the misting plate (2) in the front grid (3) making sure that the logo in
the center of the plate is horizontal, parallel to the oor and ensure it by
using the screw provided (4).
Unscrew the lock ring of the back grille (7) by rotating it counterclockwise,
from the motor shaft (9).
Insert the back grille (8) on the motor shaft (9) so that the grip is pointed
upwards and the holes/pins match. Then x it with the grille lock ring (7)
by rotating it clockwise.
Insert the fan (6) on the motor shaft (9) and x it by rotating the lock ring
(5) counterclockwise.
Open the clip of the front grille (3) and place it on the back grille (8)
making sure that the logo in the central stud is placed horizontal, parallel
to the oor.
Find the proper position to tighten the safety screw (1).
Fill up the tank (19) following the instructions from paragraph “HOW TO
FILL UP THE TANK” and place it on the main body of the humidier (20).
Connect the misting tube (22) to the misting adjustment knob (2) and in
the lower part insert the the humidier cap (23) on the tank (19).
The assembly procedure is complete.
Assembling
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ardes AR5M39 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ardes AR5M39 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 33.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info