801752
9
Zoom out
Zoom in
Previous page
1/40
Next page
9 / 40
(EN) ASSEMBLING
(see image at last page)
1. Front grille
2. Lock ring of the fan
3. Safety screw of the fan
4. Fan
5. Lock ring of the back grille
6. Back grille
7. Motor shaft
8. Oscillation knob
9. Motor
10. Control panel
11. Main body screw
12. Small decorative base
13. Adjustment rod
14. Height adjustment knob
15. Base rod
16. Screws for fixing the base rod (4 pieces)
17. Cross base
18. Plastic base
19. Weight of the plastic base
20. Screw for weight fixing
A-B. Locking pin for the rear grille
AR5BR40P
1. Unscrew the screws (16) from the two parts which form the basis of the cross (17).
2. Fit the two parts which form the basis of the cross (17) as is shown in the picture.
3. Unscrew the height adjustment knob (14) from the base rode (15) and insert the small
decorative base (12).
4. Pull out the adjustment rod (13) from the base rod (15) then tighten the height adjustment
knob (14) on the base rod (15).
5. Tighten the base rod (15) with the screws (16) previoulsy unscrewed from the cross base
(17).
AR5BR40PB
1. Insert the base rod (15) into the base’s hole (18).
2. Turn over the base (18) so the base rod (15) is pointing the floor then place the weight
(19) on the bottom of the base and tighten it firmly with the screw (20).
3. Turn over the base again with the base rod fixed.
4. Unscrew the height adjustment knob (14) from the base rod (15) and pull the adjustment
rod (13) out from the base rod (15). Tighten the height adjustment knob (14) on the base
rod (15).
AR5BR40P - AR5BR40PB
6. Loosen the screw of the main body (11).
7. Insert the main body on the adjustment rod (13). Tighten the screw (11) for fixing it.
8. Unscrew the locking ring of the rear grille (5) from the motor shaft (7) by turning it
counterclockwise.
9. Insert the rear grille (6) on the motor shaft (7) making sure that the handle on the back is
facing upwards and the locking pins (A-B) are in the vertical holes of the rear grille. Screw
the locking ring (5) by turning it clockwise.
10. Place the blade (4) on the motor shaft (7) and secure it by turning counterclockwise the
locking ring (2).
11. Open the clips of the front grille (1) and place it on the back grille (6) making sure that
the logo on the central stud is placed horizontally, parallel with the floor.
13. Find the proper position to lock the clips and insert the safety screw of the grille (3).
(EN) INSTRUCTIONS FOR USE
Place the fan on a flat, dry and stable surface, and insert the plug of the fan in a socket.
Select the desired speed by pressing the buttons on the control panel (10):
0 =off 1 =minimum speed 2 =medium speed 3 =maximum speed
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ardes AR5BR40P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ardes AR5BR40P in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info