801824
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
9
Make sure you have all the components before beginning installation. To
prevent damage, attach the motor to the support rod on a soft surface or
use the polystyrene contained in the package.
-Open the carton box and take out the fan (fig. 1)
-Assemble the support plate on the ceiling using two or more screw
anchors and appropriate washers. Attention: the provided screw are for
wood joist. (fig. 2).
-Insert the support rod through the upper cap and lower cap.
-Insert the electric cables coming out from the motor through the support
rod and connect them to the screw terminal placed on the top of support
rod. NB: arrange the electrical connection as shown in fig. 3
-Fix the support rod to the motor using the pin and pin’s nut (see Techni-
cal information - n° 7-8).
-Hang the fan to the hook on the support plate and connect the electrical
cable coming from the ceiling to the screw terminal placed on the top of
support rod. NB: arrange the electrical connection as shown in fig. 3
-Slide upwards the upper cap (fig. 4)and fix it with the screw (fig. 5)
-Slide downwards the lower cap; it must be supported by the motor. Fix it
with the screw (fig. 6).
-Remove the plastic retainer of the blades fastening screws located in
the upper part of the motor body as shown in fig. 7.
-Center the slots on the blades with the heads of the blades fixing screws
and slide the blades so that the head of the screws are positioned at the
end of slot (fig. 8)
-Tighten the screw (fig. 9)
-Install the light bulb (E27 type Max 60W not provided) in the light holder
-Install the decorative glass and fix it using the provided screws. Take
care to do not tight the screws too much or the decorative glass can get
broken (fig. 10).
10
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ardes AR5A90L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ardes AR5A90L in the language / languages: English, Italian as an attachment in your email.

The manual is 3.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info