801820
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
910
groove of the
plastic ball
Make sure you have all the components before beginning installation. To
prevent damage, attach the motor to the support rod on a soft surface or
use the polystyrene contained in the package.
-Open the carton box and take out the fan (fig. 1)
-Assemble the support plate on the ceiling using two or more screw
anchors and appropriate washers. Attention: the provided screw are for
wood joist. The electric cables coming out from the ceiling must be insert
on the central holes of the support plate (fig. 2).
- Remove the safety stopper and washer from the safety pin then remove
the safety pin from the support rod (fig. 4). Insert the support rod through
the cap.
-Loosen the screw placed on the bottom part of the support rod and
insert the electric cables coming out from the motor through the support
rod (fig. 5).
-Fix the support rod to the motor housing using the safety pin and lock it
using the washer and the safety stopper (fig. 6 and 7).
-Tighten the screw placed on the bottom part of the support rod (fig. 8).
-Unscrew the 4 screws placed on the support plate.
-Hang the fan to the hook on the support plate using the cap’s hole and
connect the electrical cables (fig. 9). NB: arrange the electrical
connection as shown in fig. 3.
-Remove the fan from the hook and fix the cap to the support plate
making sure the holes of the cap are coincident to the holes of the
support plate. Fix the cap by using the 4 screws previously unscrewed.
ATTENTION: make sure to tighten the screws very well and that the
groove of the plastic ball fit the jut of the cap (fig. 10).
-Fix the blade support to the blades by using the provided screws (fig.
11).
-Unscrew the screws from the bottom part of the motor and remove the
paper protection. Place the blades with blade support on the motor
making sure that the holes are coincident and fix them by using the
screws previously unscrewed (fig. 12).
-Install the light bulb (E27 type Max 60W not provided) in the lamp holder
-Install the decorative glass making sure that the three protuberances
are coincident with the three recesses of the decorative glass. Then
secure it by turning it.
11 12
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ardes AR5A107W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ardes AR5A107W in the language / languages: English, Italian as an attachment in your email.

The manual is 0.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info