801741
16
Zoom out
Zoom in
Previous page
1/24
Next page
16
Power 3 (G icon - 3 bars on in the display): the appliance work at the
maximum power level (2000W)
5. To distribute the air ow over a wider surface, press the swing
pushbutton: it start to swing from right to left and viceversa. To stop
the appliance in the desired position, simply press the oscillation
pushbutton again.
6. To turn off the product press On-Stand-by pushbutton: the display
will show a countdown fro about 30 seconds. After 30 seconds the
appliance will be in stand-by mode.
7. To completely turn off the product the main switch must be in “0”
position (off).
The product is equipped with adjustable thermostat by stopping the air
ow as soon as the desired ambient temperature is reached; hot air will
start to ow again when the ambient temperature drops. To select the
desired temperature press “+” or “-” pushbutton after set the power level
(minimum, medium or maximum). The set temperature will displayed on
the display.
The set temperature can be displayed in either °C or °F; to set the unit
of measurement of temperature turn on the product, push and keep
pushing “+” pushbutton until the unit of measurement will ashing on the
display. Push “+” pushbutton to select the desired unit of measurement;
wait a few seconds for the setting to be memorised.
To activate ECO function press ECO pushbutton. The ECO icon will
be displayed. This function will compare the target temperature with
the current ambient temperature and it will automatically select the
most appropriate heating power level to guarantee an optimum comfort
level while reducing the energy consumption. (Attention: this function is
available only if one power level 1, 2 or 3 is selected). When the ECO
function is on, ECO icon (A) is dispalyed and the appliance may switch
automatically to a lower or higher heating level even several time. The
corrisponding heating level is always shown on the display (G icon).
The appliance is equipped with 24 hours timer that allow to set the
automatic start or automatic off of the product. To set the automatic start:
when the product is in stand-by mode press TIMER pushbutton; TIMER
icon (F) and the time remaining before the appliance will be turned on
blink on the display. To adjust the timer press “+” or “-” pushbuttons then
wait a few seconds for the setting to be memorised. On display stand-by
icon and timer icon blinking indicating that the timer for auto on is set.
When the programmed time is reached, the appliance is turned on with
the setting used during the previous period of operation. Attention: when
the timer for auto start is setted do not turn off the product from the main
switch.
To set automatic off: when the product is on, press TIMER pushbutton;
the TIMER icon (F) and the time remaining before the appliace turn off
blink on the display. To adjust the timer press “+” or “-” pushbuttons then
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ardes AR4P11D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ardes AR4P11D in the language / languages: English, Italian as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info