Manual Ardes AR1FG01 (page 11 of 31) (English, German, French, Italian, Spanish)

801703

Zoom out

Zoom in

1/31

11 / 31

(EN) INSTALLATION

Installation class: 1.

WARNING: This appliance must be installed by professionally qualified

personnel.

The installation must be carried out in conformity to the regulation in force (for

Italy: UNI 7131).

 Place the stove on a horizontal surface respecting the instructions indicated in

the chapter of Safety Instruction .

 Check that the gas pipe that you want to use is in accordance with the rules in

force in your country (for Italy: UNI 7140) and it has already assembled with the

pressure reducer with the characteristics described in the chapter of Safety

Instruction and in the technical data table.

 Insert into the gas pipe a full mesh metal clamp suitable for LPG gas pipes .

 To insert the gas pipe in the stove gas’s connector on the back of the stove and

push it until the pipe is inserted up to the connector for at least 2cm .

 Tighten the metal clamp in order to seal safely the rubber hose to the stove

connector.

(EN) LPG CYLINDER ASSEMBLY

 Before assembling the cylinder, turn the burner valve’s knobs clockwise until them

reach the closed position.

 Place the gas cylinder in a stable and dry surface

 Connect the pressure regulator already assembled to the gas pipe to the LPG

cylinder making sure you have correctly inserted the seal gasket supplied with the

cylinder.

 Always use the new gaskets supplied together with the LPG cyclinder.

 Tighten the regulator to the cylinder to prevent gas leakage.

 Check that the gas hose is not twisting. In case, rotate the pipe in order that every

twist or curve is eliminated and the tube has a linear shape.

 Turn the cylinder’s valve knob until fully open in order to allow the gas LPG to

feed the stove.

 Keeping the stove taps closed for fice minutes and check does not spread out

smell of gas before proceeding with the use of the stove.

 To verify that the installation has been done successfully, pour soapy on the joints

of every connection. Any leaking will be well visible using this solution.

 Attention: Never use a flame to check the Gas leaking.

(EN) PRODUCT’S USE

 Lightly press and turn counterclockwise the burner valve’s knob according the

burner you want use.

 Put a lighter close to the defined burner

 Wait until the burner is fully switch ON and adjust the flame by turning the knob

clockwise or counterclockwise according your needs .

 To make the temporary shutdown of the burner , turn the knob clockwise to the

OFF position.

 After cooking , or before storing the product, turn OFF the burner by turning

clockwise the cylinder valve’s knob tilli s close and wait for the complete extinction

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ardes AR1FG01 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ardes AR1FG01 Manual

Product: