Manual Arctic Spas Mustang (page 22 of 124) (English)

765011

Zoom out

Zoom in

1/124

Owners Manual - Arctic Spas®

Remove Excess Minerals

Most tap water has minerals such as Calcium, Copper, Iron, Manganese and Sodium in it, and the

circulation of water can cause the erosion of metals from spa equipment which can present possible scaling

and staining problems in your spa. Cases of source water with high minerals (such as some well water):

- 1. We recommend you add 3 1/2 tablespoons (48 grams) of Arctic Pure® Best Defense

per 1000 litres (265 gallons) of water while lling your spa.

Balance the Total Alkalinity (TA)

1. The recommended Total Alkalinity (TA) for your spa water is 80-120 ppm.

2. Total Alkalinity is a measure of the total levels of carbonates, bicarbonates, hydroxides, and

other alkaline substances in the water. TA is referred to as the water’s “pH bu󰀨er”. In other

words, it’s a measure of the ability of the water to resist changes in pH level.

3. If the TA is too low, the pH level will uctuate widely from high to low. Fluctuations in pH

can cause corrosion or scaling of the spa components. Low TA can be corrected by adding

Arctic PureTM Perfect Balance.

4. If the Total Alkalinity is too high, the pH level will tend to be high and may be di󰀩cult to bring down. The

pH can be lowered by using Arctic Pure® Adjust Down.

5. Once the TA is balanced, it normally remains stable, although some sanitizers, and the

addition of more water with a high or low alkalinity will raise or lower the TA reading of the

water.

6. When the Total Alkalinity is within the recommended range, proceed to the next step.

Balancing the pH

1. We recommended a pH range for your spa water of; 7.2-7.6

2. The pH level is the measure of acidity and alkalinity. Values above 7 are alkaline; those

below 7 are acidic. Maintaining the proper pH level is extremely important for:

• Optimizing the e󰀨ectiveness of the sanitizer.

• Maintaining water that is comfortable for the user.

• Preventing equipment deterioration.

• Preventing cloudy or odorous water.

3. If the spa water’s pH level is too low, the following may result:

• The sanitizer will dissipate rapidly.

• The water may become irritating to spa users.

• The spa’s equipment may corrode.

If the pH is too low, it can be increased by adding Arctic Pure® Adjust Up to the spa water.

4. If the pH level is too high, the following may result:

• The sanitizer is less e󰀨ective.

• Scale will form on the spa shell surface and the equipment.

• The water may become cloudy.

If the pH is too high, it can be decreased by adding Arctic Pure® Adjust Down to the spa water.

5. It is important to check the pH on a regular basis. The pH will be a󰀨ected by the bather

load, the addition of new water, the addition of various chemicals, and the type of sanitizer

used.

6. When the pH is within the recommended range, proceed to the nal step.

2222

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Arctic Spas Mustang in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Arctic Spas Mustang Manual

Product: